FJ40 POWER STEERING CONVERSION

[craigauz]

IS IT WORTH IT, ROUGHLY THE COST AND WHAT PARTS NEEDED


IS IT WORTH CONVERTING TO GAS ALSO ANY IDEA OF COST ? 1700 OFF THE GOV AN THE WHAT??


REALLY APPRECIATE ANY ANSWERS GIVEN GUYS, AVAGOODN

[stock 4runner]

Mate as far as I've heard most people use a 60 series power steer box and arms.
As for the gas if you have a standard carbie motor it will give you a tiny bit less power but will run on any angle so no more flooding. For a fitted gas kit it should cost you about $2000

[craigauz]

Hey thanks for that,Know much about the punp set up. Common brand

[stock 4runner]

Just use what ever you can find. I heard falcon works well unless you can find something that will bolt straight on. Most people get a custom high pressure line made.

[Clanky]

Any pump off a 2F/3F ( 60 series or 80 series etc) fits straight up to a FJ40 engine ( unless you got a conversion )

[Dannyboy]

IS IT WORTH IT, ROUGHLY THE COST AND WHAT PARTS NEEDED

REALLY APPRECIATE ANY ANSWERS GIVEN GUYS, AVAGOODN

Did you try to search?
Have a look at the top of the Toyota section look for the bible
or click this link http://www.outerlimits4x4.com/viewtopic.php?t=46390

and no need to shout

[pcman]

he didnt like the answer over on 4x4 monthly so he came here trying to be spoon fed aswell

[BundyMonkey]

Na all the stuffing around isnt worth it as i prefer heavy steering especially in the rocks with really low tyre pressures

[Mr DJ]

Yea, and better grip with the tyres on rocks then too coz it's easier to keep the traction when turning with no P/S.

[RAY185]

This thread is tits!

[Dannyboy]

he didnt like the answer over on 4x4 monthly so he came here trying to be spoon fed aswell

Try getting out of the right side of the bed tomorrow Prick