need help with drag link

[ben88milo10]

ok so iv won me a new second hand supperior drag link on ebay for f#ck all , problem, i cant get my standard one out, i belive that its probbly never been out, iv tried flogging the pisss out of it with a hammer and leavering off my bar work, the bottom i will most likely jack it up off the drag link and bash it till it lets go, but the top end (pitman arm end) has me fuc#ed....

how have you bashed them, leavered or jacked them off. . . . .



was thinking heating it up and bashing. . . any help would be great

[adzyspence]

got to bash the actual pitman arm around the draglink with a decent hammer, will eventually pop out.

[Wozza244]

You will need heat. Simple as that. And what he said ^^^

[UTEGQ]

Hey girly get a bigger hammer

[5inchgq]

Two big hammers, hit either side of the pitman arm at the same time.

[Wozza244]

Two big hammers, hit either side of the pitman arm at the same time.

But dont miss and hit both hammers together, they will fracture and send bits into your skin!

[Braddels]

Go and buy/borrow a pitman arm puller. I tried the Jack it up( Not Jack it off!!!) and smack with a hammer but it did not budge. One minute with the Pitman Arm puller and job was done. Cost me $40? from Supercarp.

[SilverBulletBM]

Two big hammers, hit either side of the pitman arm at the same time.

But dont miss and hit both hammers together, they will fracture and send bits into your skin!

Yeah can be freaking deadly! Not with two hammers but with harden steel, had one piece embed in my nose and another go straight thru my ear! Definitely wear some safety glasses! Spray some wd40 on it and hit it with a real hammer, sometimes it can take a while so don't be scared to really wack it.

[ben88milo10]

i got the fuc#er
heated it up with a blow torch and belted the piss outta it. . . ..
get me some split pins tommorrow and its back on the road.

thanks for the help guys