Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

need help with drag link

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 29
Joined: Mon May 23, 2011 5:32 pm
Location: newcastle nsw

need help with drag link

Post by ben88milo10 »

ok so iv won me a new second hand supperior drag link on ebay for f#ck all :snipersmile: , problem, i cant get my standard one out, i belive that its probbly never been out, iv tried flogging the pisss out of it with a hammer and leavering off my bar work, the bottom i will most likely jack it up off the drag link and bash it till it lets go, but the top end (pitman arm end) has me fuc#ed.... :bad-words:

how have you bashed them, leavered or jacked them off. . . . .



was thinking heating it up and bashing. . . any help would be great
89gq lwb tb42,7"springs,radius arms,front air locker,winch,1/4 chop,bars all round
Posts: 82
Joined: Sun Apr 18, 2010 8:16 am
Location: Yandina

Re: need help with drag link

Post by adzyspence »

got to bash the actual pitman arm around the draglink with a decent hammer, will eventually pop out.
A boss is like a diaper, always on your arse and usually full of s#*t
Posts: 1443
Joined: Thu Jul 10, 2008 6:23 pm
Location: Probably driving a dozer

Re: need help with drag link

Post by Wozza244 »

You will need heat. Simple as that. And what he said ^^^
Get out there!!
Posts: 34
Joined: Wed Nov 11, 2009 4:58 pm
Location: Mid North Coast

Re: need help with drag link

Post by UTEGQ »

Hey girly get a bigger hammer
Posts: 1111
Joined: Thu Nov 01, 2007 9:03 pm
Location: Rockhampton CQ.

Re: need help with drag link

Post by 5inchgq »

Two big hammers, hit either side of the pitman arm at the same time.
Posts: 1443
Joined: Thu Jul 10, 2008 6:23 pm
Location: Probably driving a dozer

Re: need help with drag link

Post by Wozza244 »

5inchgq wrote:Two big hammers, hit either side of the pitman arm at the same time.
But dont miss and hit both hammers together, they will fracture and send bits into your skin!
Get out there!!
Posts: 45
Joined: Mon Mar 30, 2009 1:34 am
Location: Gove, NT

Re: need help with drag link

Post by Braddels »

Go and buy/borrow a pitman arm puller. I tried the Jack it up( Not Jack it off!!!) and smack with a hammer but it did not budge. One minute with the Pitman Arm puller and job was done. Cost me $40? from Supercarp.
Posts: 68
Joined: Tue Mar 11, 2008 10:41 pm
Location: Brisvegas

Re: need help with drag link

Post by SilverBulletBM »

Wozza244 wrote:
5inchgq wrote:Two big hammers, hit either side of the pitman arm at the same time.
But dont miss and hit both hammers together, they will fracture and send bits into your skin!
Yeah can be freaking deadly! Not with two hammers but with harden steel, had one piece embed in my nose and another go straight thru my ear! Definitely wear some safety glasses! Spray some wd40 on it and hit it with a real hammer, sometimes it can take a while so don't be scared to really wack it.
Posts: 29
Joined: Mon May 23, 2011 5:32 pm
Location: newcastle nsw

Re: need help with drag link

Post by ben88milo10 »

i got the fuc#er :D :finger: :armsup:
heated it up with a blow torch and belted the piss outta it. . . ..
get me some split pins tommorrow and its back on the road.

thanks for the help guys
89gq lwb tb42,7"springs,radius arms,front air locker,winch,1/4 chop,bars all round
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest