Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

some pics of my junk

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1361
Joined: Thu Oct 24, 2002 8:47 pm
Location: Now in a happy place.

Post by Cheezy4x4 »

Whats the wheel base gunna be. :?:
Top
Posts: 3614
Joined: Sat Nov 02, 2002 9:02 am
Location: Gold Coast

Post by 83 lux »

mickbj42 wrote:thanks. It is just taking forever!

i have been waiting for people to hang ***** on it. This is everyones chance!


Mate it is coming alone great
should turn out good
Will we get a chance to look at the finished project in person
:bday:
HOOLAY Wish i could buy boggers for my DH bike
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

Cheezy4x4 wrote:Whats the wheel base gunna be. :?:


havent decided for sure around 105-110
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

83 lux wrote:
mickbj42 wrote:thanks. It is just taking forever!

i have been waiting for people to hang ***** on it. This is everyones chance!


Mate it is coming alone great
should turn out good
Will we get a chance to look at the finished project in person
:bday:


yeah i am going to bring it up to XRCC.
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

so you got scared when it come time to weld it altogether so gave up on the project or just stopped posting pics???



NICK
TECH SCREW GURU
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

it is all welded. araldite is welding isnt it? :finger:

just havent taken any more pics.

Just waiting for my diffs get here!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

and i have heaps busy with other things so havent really done anything major, just little odds and ends that take forever!
Top
Posts: 211
Joined: Wed Dec 18, 2002 8:17 pm
Location: Moura

Post by Carl Coight »

I'd love to see more pics. :D
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

Carl Coight wrote:I'd love to see more pics. :D


What do you want pics of?
Top
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

Still waiting for diffs eh? I know the story.
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

N*A*M wrote:Still waiting for diffs eh? I know the story.


they were supposed to be here 5-6 weks after TTC!!

then a few weeks after that, then............blah blah blah!

last one was they were going to be here wednesday or thursday this week, what do you know, NOT HERE!!!

I am really getting pissed off now!
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

bit of progress now.

got the rockwells last night. Stripped one of them down today. The uni's are fuckin huge!!

The complete diff with drums etc are pretty heavy but without the drums they should be quite a bit lighter. You could also get a bit more weight out them, not alot though, by machining the hub face down. That would also narrow the WMS to WMS measurement a bit too.

So far i am extremely impressed with them, definately worth the wait.

If anyone is interested there a few more sets avaliable, PM me and i will give you the details.

I will get some pics later :twisted:
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

ok a few pics.

rockwell uni
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

rockwell axle
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

the bare housing
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

pic of the drum and crap taken off one side
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Are these fitted with a factory locker? Or is there one available?
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

no locker in these ones.

You can get a detroit for them. I am going to get a detroit for the front and probably weld the rear. I will ring around a few of the truck joints with the model number etc of the diff and see if i can get a detroit for it out here. Some of the stuff from different model rockwells are interchangable, i am hoping that this centre was available out here in something. I will find out on tuesday.
Top
Posts: 119
Joined: Wed Oct 23, 2002 7:54 pm
Location: Brisbane, Australia

Contact:
Contact tjpete

Post by tjpete »

Mick,

It looks A W E S O M E ! ! ! AND! S T R O N G ! ! !
Peter Kincade
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

tjpete wrote:Mick,

It looks A W E S O M E ! ! ! AND! S T R O N G ! ! !


Thanks, thats why i went with them, hopefully no more breakages!
Top
Posts: 119
Joined: Wed Oct 23, 2002 7:54 pm
Location: Brisbane, Australia

Contact:
Contact tjpete

Post by tjpete »

mickbj42 wrote:
tjpete wrote:Mick,

It looks A W E S O M E ! ! ! AND! S T R O N G ! ! !


Thanks, thats why i went with them, hopefully no more breakages!


Mick,

If you ever manage to break one, I don't want to be on board! :D It is great to see someone doing this. What driveshaft flanges do they use? Are they Rockwell specific?
Peter Kincade
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

hang on a sec, i will run down and snap a few more pics.
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

driveshaft flange.

I will probably just machine up an adapter to accept my existing tailshafts
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

i am in the process of clearancing the housing at the moment

here is what i cut off
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

some progress shots of the housing
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

another
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

another
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

i made some quick measurments with the old cruiser diffs i have here.

It should be around 10mm more clearance than the cruiser, from axle centre line to the lowest point on the centre.
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

How much more lift do you think you will need to run to clear the centre?
And are you going to run a pinion brake or wheel brakes?
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

RUFF wrote:How much more lift do you think you will need to run to clear the centre?
And are you going to run a pinion brake or wheel brakes?


I wont have any clearance issues in the rear as i have cut the chassis off. In the front there should be plenty of room. I am not sure what total lift you would need.

I will get an axle centre line to top of the diff measurment tomorrow for you.

I am going to run wheel brakes, they are simple to put on, i dont know why all the yanks say it is too hard!
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 30 guests