Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

BALENO ENGINE SWAP

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

BALENO ENGINE SWAP

Post by OVERKILL ENG »

As requested I am starting a thread on the BAleno 1.3 engine swap that I am currently doing on my Zook.
More info and Pictures to come. :lol: :lol:

For those that aren't familiar with it they are a 1.3 ltr 16 valve single came engine with multipoint injection.
In simple terms it is a 1.3 GTI bottom end with a 16 valve injected Vitara head on it.
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 32
Joined: Fri Apr 16, 2004 2:51 am
Location: italy

Contact:
Contact trialjimny

Post by trialjimny »

or, if you prefer, it's the 1998-2000 jimny engine.
are you going to swap the tranny too?
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Post by Beastmavster »

Why not the 1.8 :(
Top
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Contact:
Contact christover1

Post by christover1 »

I'm watching with interest, as efi/throttle body conversion to my G13B would be nice.
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Top
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

Forced induction again? :cool:
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

christover1 wrote:I'm watching with interest, as efi/throttle body conversion to my G13B would be nice.


My old engine had the throttle body injection off a Vitara which was a shiat easy conversiion as it all bolts straight on.
This one has a multi point manifold.

The first hurdle we have come across is that the head has the water outlet in the back of the head which points straight into the firewalll so I am toying with the idea of modifiing the manifold to run the outlet out at thefront of the head.
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

Damo wrote:Forced induction again? :cool:



Of course :cool:
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

All the parts are here for the rebuild so I will hopefully have it ready to go in this week. This is where you search guru's come in I need a wiring diagram for the computer. PLEASE. It is a 1.3 Baleno engine.
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 26
Joined: Fri Feb 13, 2004 11:28 am
Location: Penrith

Post by DRV11T »

Sam check your PM
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

DRV11T wrote:Sam check your PM



Done ;)
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

DRV11T wrote:Sam check your PM


Okay finally made some good progress this week (5.30am starts )
Motor is back together and in the Zook complete with blower.
Hit a few snags on the way.
Engine fan won't fit water pump so have to run thermo.
Pulleys beeing multi rib are wider and had to make new blower brakets.
Make new throttle cable.
Made right angle hose fitting for the back of the head to run top radiator hose.
Modified Vit extractors to fit.
Got wiring diagram of DRV11T much appreciated. Should have it wired up on the weekend.

Have taken heaps of photo's but keep leaving the camera at work so I will post them up on the weekend.
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Contact:
Contact christover1

Post by christover1 »

I run a swift import motor, it has the multi v belts, and also dont fit the sierra fan. we solved this with an alloy boss adaptor made up by our zook club president. ( cause I seen too many thermos die in awkward places ) christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Is the same engine as in the 1.3 99- Suzi Carry's or is a different piece of kit.

cheers
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

christover1 wrote:I run a swift import motor, it has the multi v belts, and also dont fit the sierra fan. we solved this with an alloy boss adaptor made up by our zook club president. ( cause I seen too many thermos die in awkward places ) christover



I agree with you I would prefer to run the engine fan.I will look at changing this . Onother option is to run the Sierra water pump and balancer and change the pulley on the alternator to suit.
SAM.

Another thing we found was that the the pulley for the power steer on the balancer was 2mm bigger in diameter than the one we were using to run the blower so we will have a little more boost now. (1-2 pounds)
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Contact:
Contact christover1

Post by christover1 »

OVERKILL ENGINEERING wrote: Onother option is to run the Sierra water pump and balancer and change the pulley on the alternator to suit.
SAM.


yep, me had that thought, as I had to change the cam, but it meant taking off 2 year old swift bits, to replace with 20 year old sierra bits...swift alternator seems to be less trouble, but maybe its just newer condition? christipover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

christover1 wrote:
OVERKILL ENGINEERING wrote: Onother option is to run the Sierra water pump and balancer and change the pulley on the alternator to suit.
SAM.


yep, me had that thought, as I had to change the cam, but it meant taking off 2 year old swift bits, to replace with 20 year old sierra bits...swift alternator seems to be less trouble, but maybe its just newer condition? christipover



I agree I want to stay with the baleno alternator as it is a 60 amp one as apposed to the Sierra's 25amp one.
The engine looks good in there and there is still 3 inches of room under the bonnet with no bodylift.
I'll make sudr I get some photo's up on the weekend.
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 247
Joined: Sat Oct 26, 2002 7:48 am
Location: Brisbane

Post by zooki »

A Sierra water pump with Vitara pulley and fan may work?
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

some photo's
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

:D
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 153
Joined: Mon Dec 16, 2002 6:21 am
Location: NZ

Post by lilpigzuk »

Is that the same engine as a swift GTi?? Im running one of those and considering bolting a hairdryer on the side :)
Anymore Turbo info you can give??

cheers
Rex
83 SJ410 GTi
NZ
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

lilpigzuk wrote:Is that the same engine as a swift GTi?? Im running one of those and considering bolting a hairdryer on the side :)
Anymore Turbo info you can give??

cheers
Rex
83 SJ410 GTi
NZ



Read the first post :D
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 101
Joined: Sat May 22, 2004 6:46 pm

Post by suzukisam »

lilpigzuk wrote:Is that the same engine as a swift GTi?? Im running one of those and considering bolting a hairdryer on the side :)
Anymore Turbo info you can give??

cheers
Rex
83 SJ410 GTi
NZ


rex, looks like the g13bb efi 16v sohc motor with supercharger
Lester
96 SJ80V - it has coils from the factory!
Top
Posts: 295
Joined: Fri Dec 26, 2003 1:03 pm
Location: Townsville

Post by ca18escort »

Sam,
Which supercharger is that one? Is it the SC12? I an looking at chucking one on my zook once I get the EFI sorted.

Cheers
Paul
1993 Triton V6 on the Build up.....not any more as I now have a Zook to play with.
Top
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

Looks like The Aisin AMR300 fitted to the Japanese-market 660cc Subaru Vivio/Pleo.
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

cj wrote:Looks like The Aisin AMR300 fitted to the Japanese-market 660cc Subaru Vivio/Pleo.



COrrect :D
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 7954
Joined: Fri Sep 05, 2003 5:43 pm
Location: Tasmania

Post by DeWsE »

g13bb efi 16v


Is that the correct engin?

Generally how available are they from the importers?
Top
Posts: 2
Joined: Mon Jun 07, 2004 10:03 am
Location: Adelaide Hills

Post by SpiritWolf »

Just a question
how much is it costing u to do this project???
Top
Posts: 6
Joined: Wed Dec 31, 2003 11:26 am
Location: Brisbane, QLD

Post by NoPsi »

Is the blower centrifugal or roots style? Only asking because I am toying with the idea of one of these in a draw thru setup on a 1L. Just wondering how long theb lades will last will fuel pumping through them.

Craig
Top
Posts: 3076
Joined: Wed Nov 19, 2003 7:09 am
Location: web wheelin' from sydney

Post by stumped »

prolly not costing much cos he doesn't charge himself labour :D


how's it goin sam? any updates?
___,,,,_('o')_,,,,____
part of the newy conspiracy...
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

No updates have been to busy.
It is close probably needs 2 days work and it is done.
Cost wise don't know will add it up when it is finished but doing the labour myself makes it quite cheap.
SAM :D
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 0 guests