Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Which UHF antenna?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 343
Joined: Fri Jun 18, 2004 3:25 pm
Location: Melbourne

Which UHF antenna?

Post by EricB »

Hi, Im thinking of putting a UH088 into my car.

What would be a good choice of antenna for 4wding

Should I get a ground-independent one?

Low gain or high gain?

Cheers
Eric
Posts: 2097
Joined: Mon Jun 14, 2004 8:06 pm
Location: Land of Plenty

Post by blkmav »

Ground independant 4.5db is a good all round choice.

http://www.gme.net.au/land/ants_uhf.html

I have #10. I also brought a stubby 1/4 wave #2 for when I am not in the bush
Weekdays - Prado GXL D4D with some stuff
Weekends - Mav shorty with lots of stuff
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

t

Post by DIRTY ROCK STAR »

Eric is that a Uniden job???

i recently picked up one of these off a mate 2nd hand.

any info shared would be appreicated.
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Posts: 27
Joined: Thu May 27, 2004 10:05 pm
Location: Melb, outer south eastern, Vic

Post by Stus_GQ »

Dirty Rock Star,
I can email you manuals for Uniden UH-053 or a UH-077 if thats any help. :?:
PDF's ~6mb each.

Stu...
Cause there are a lot of cows in Toorak, thats why I need it....
Posts: 2056
Joined: Tue Mar 23, 2004 6:17 pm
Location: Melbourne

Post by Big Red Toy »

i have arial 16 :D , and a uniden radio i think :? , slim line thou. paid $400 :D , go to 4wd show, walk from stand to stand and play em off against each other :D , they are suckers :D
Style Side Maverick Ute
4.2 Turbo Diesel
35" Simex
4" Procomp suspension
2" Bodylift
Fibreglass Stuff....
Now highmount & Plasma :d
Posts: 67
Joined: Mon Mar 08, 2004 6:42 pm
Location: North Rocks

Post by RichardW »

Replaced a UH011 with a UH089 radio and still use the Mobile 1 6DB ground independent fibreglass wip aerial. Works OK. My understanding is low gain for hilly terrain and high gain for flat country.

This site might help:-

http://www.gme.net.au/land/choose_ant.html
Richard
2005 Landcruiser TD100+a few bits
[url=http://members.iinet.net.au/~rwindeyer/IMG_4509adj.jpg][b]My Rig[/b][/url]
[url=http://richardw.redbubble.com/][b]My Profile[/b][/url]
Posts: 343
Joined: Fri Jun 18, 2004 3:25 pm
Location: Melbourne

Post by EricB »

It is a uniden, but I havn't bought mine yet. im looking for a good price.

Have you tried the uniden web site for manuals?

www.uniden.com.au

Eric
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

t

Post by DIRTY ROCK STAR »

EricB, i dont knnow if it is the going rate or not but i paid 100 for mine
with a heaps dodgy looking aerial.

but now the toss informs me he cant find the brackets to mount it.
so im a little disappointed. but i quickly gave it power and it seems to work ok....


cheers i will try their website for the manual.
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Posts: 343
Joined: Fri Jun 18, 2004 3:25 pm
Location: Melbourne

Post by EricB »

I'd be happy with $100 :)

Best price i have seen so far is $279 new
Posts: 2097
Joined: Mon Jun 14, 2004 8:06 pm
Location: Land of Plenty

Post by blkmav »

Go see Harry at Telstat. He has fitted radios to both of my trucks and his work is excellent.

http://www.telstat.com.au
Weekdays - Prado GXL D4D with some stuff
Weekends - Mav shorty with lots of stuff
Posts: 343
Joined: Fri Jun 18, 2004 3:25 pm
Location: Melbourne

Post by EricB »

Cool

There was a place in Mitcham, but I cant find them now.

Have they closed down or just moved?
Posts: 27
Joined: Thu May 27, 2004 10:05 pm
Location: Melb, outer south eastern, Vic

Post by Stus_GQ »

Just Communications,
they sold up and the new owners moved it to Molan St in Ringwood, down the road from the mega porno place. ;)
Cause there are a lot of cows in Toorak, thats why I need it....
Posts: 2056
Joined: Tue Mar 23, 2004 6:17 pm
Location: Melbourne

Post by Big Red Toy »

thats the one, i got a uniden uh089 & a GME aerial AE4705
Works great paid $400 from 4wd show last year from Just communications in ringwood, 9879 8111
16 Molan St, Ringwood.
Cheers
Style Side Maverick Ute
4.2 Turbo Diesel
35" Simex
4" Procomp suspension
2" Bodylift
Fibreglass Stuff....
Now highmount & Plasma :d
Posts: 343
Joined: Fri Jun 18, 2004 3:25 pm
Location: Melbourne

Post by EricB »

Excellent

thanks guys
Posts: 3099
Joined: Wed Dec 11, 2002 10:55 am
Location: Central Queensland

Post by BundyRumandCoke »

A tip if anyone decides to buy an Electrophone AE409L 6/9Db stainless whip antennae. The whip sections have a habit of fatigueing off immediately above the mount. Get a piece of fuel hose, about 2 inches long, and slide it down over the larger part of the base where the whip goes in, and the grub screw is, leaving about 1 inch up around the whip itself. Now fill the hose around whip with silicon sealer. This gives a much larger area of support, and the whip wont break off.
Mud makes excellent toothpaste.
Posts: 3224
Joined: Mon Jan 12, 2004 6:03 pm
Location: Moggill

Post by phippsy »

I got my elevated feed uhf aerial from a truck wrecker cheap as chips, on $10 :D
Posts: 239
Joined: Thu Aug 07, 2003 2:27 pm
Location: Mongol land

Post by GeneralFubashi »

thanks for the tip on the AE406/9 Mine never actually broke at the base, but has snapped about 3 times in the middle bit. I think these aerials are quite sensitive to where they are mounted. After i moved it from the bullbar to the roof, i have had no more trouble. Good aerial that.


Sam
79Bj40
kg107,999, AE406, Col6M
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

thanks for the tip on the AE406/9 Mine never actually broke at the base, but has snapped about 3 times in the middle bit. I think these aerials are quite sensitive to where they are mounted. After i moved it from the bullbar to the roof, i have had no more trouble. Good aerial that.

Like Grandfathers Axe :?

I have used a Polar 6db I think , for the past 6 years with no problems.

Bazzle
Posts: 2056
Joined: Tue Mar 23, 2004 6:17 pm
Location: Melbourne

Post by Big Red Toy »

BundyRumandCoke wrote:A tip if anyone decides to buy an Electrophone AE409L 6/9Db stainless whip antennae. The whip sections have a habit of fatigueing off immediately above the mount. Get a piece of fuel hose, about 2 inches long, and slide it down over the larger part of the base where the whip goes in, and the grub screw is, leaving about 1 inch up around the whip itself. Now fill the hose around whip with silicon sealer. This gives a much larger area of support, and the whip wont break off.

Don't buy the 6ft one, they are real easy to break if not cautious.
I have a gme 4ft and its great, as long as the bullbar mount is strong they will last
Style Side Maverick Ute
4.2 Turbo Diesel
35" Simex
4" Procomp suspension
2" Bodylift
Fibreglass Stuff....
Now highmount & Plasma :d
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests