Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

How do you get the crankshaft timing belt sprocket off.

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 402
Joined: Sun Oct 20, 2002 3:55 pm
Location: Changing Nappies Round 2.

How do you get the crankshaft timing belt sprocket off.

Post by The Master »

How do you get the crankshaft timing belt sprocket off the crankshaft?

The darn thing must be glued on.

I need to change the front oilseal.

Any one have a puller that would work in Brisbane.


Cheesr,

Carl
Top
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Contact:
Contact mud4b

Post by mud4b »

bolt your pulley back onto it and (GENTLY) tap the pulley with a hammer..


should not have much trouble getting it off
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Top
Posts: 402
Joined: Sun Oct 20, 2002 3:55 pm
Location: Changing Nappies Round 2.

Post by The Master »

Tried that with no luck.

I wonder if it is glued on.

Bugger.
Top
Posts: 1232
Joined: Sun Feb 29, 2004 11:37 pm
Location: Brisvagas

Post by Bad JuJu »

You have taken the key (rectangular bit of metal that holds crank to sprocket drive alignment) out ????
Posting quality not quantity!

Wanted: Stock HiLux Front Leaf Springs
Top
Posts: 402
Joined: Sun Oct 20, 2002 3:55 pm
Location: Changing Nappies Round 2.

Post by The Master »

No.

Cannot even see the key.

Hmmm.
Top
Posts: 169
Joined: Tue Sep 23, 2003 1:37 pm
Location: New Zealand home of the warriors

Re: How do you get the crankshaft timing belt sprocket off.

Post by Luigi Malone »

TheMaster wrote:How do you get the crankshaft timing belt sprocket off the crankshaft?

The darn thing must be glued on.

I need to change the front oilseal.

Any one have a puller that would work in Brisbane.


Cheesr,

Carl


Fit a very good quality socket and bar to it and wind the starter over. Leave some room for the bar to get some kinetic energy going though.
Make sure the bar won't break any thing, that is allow it to hit something solid.
LM.
It's better to have LIVED for a day than to have EXISTED for a hundred years.
Top
Posts: 169
Joined: Tue Sep 23, 2003 1:37 pm
Location: New Zealand home of the warriors

Re: How do you get the crankshaft timing belt sprocket off.

Post by Luigi Malone »

Luigi Malone wrote:
TheMaster wrote:How do you get the crankshaft timing belt sprocket off the crankshaft?

The darn thing must be glued on.

I need to change the front oilseal.

Any one have a puller that would work in Brisbane.


Cheesr,

Carl


Fit a very good quality socket and bar to it and wind the starter over. Leave some room for the bar to get some kinetic energy going though.
Make sure the bar won't break any thing, that is allow it to hit something solid.
LM.

Just reread, if you have the big nut off already, then beat the F&^$ out of it.
LM.
It's better to have LIVED for a day than to have EXISTED for a hundred years.
Top
Posts: 402
Joined: Sun Oct 20, 2002 3:55 pm
Location: Changing Nappies Round 2.

Post by The Master »

So is it normally this tight?

My MX-5 and most other cars I've worked on just slid off.

Does the woodridge <SP> key slide out on the vitara.

Cheers,

Carl
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 12 guests