Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

v6 3000 5spd --> v6 3000 auto

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 365
Joined: Thu Oct 24, 2002 1:38 pm
Location: Brisbane, Nthsider

v6 3000 5spd --> v6 3000 auto

Post by redrocket »

How much differance would there be in order to do this?
"If it ain't broken, smash it harder, then make it stronger!"
Top
Posts: 149
Joined: Tue Sep 28, 2004 12:36 pm

Post by Begbie »

I havent done it to a Paj before, aside from the obvious conversion parts, you will needf to think carefully about gearing as the gearing is different between auto and man, so is the computer usually.
Top
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

Firstly you will need the t/case with the auto as well (a 5sp t/case will not mate to an auto).
The engine ECU is different than a 5sp I think mainly for the kickdown function.
Console is different as well then you need pedals.
Fark the more I think about it I just don't think it's worth the effort and $$$$
I just luv my "clacker Jabber"
Top
Posts: 365
Joined: Thu Oct 24, 2002 1:38 pm
Location: Brisbane, Nthsider

Post by redrocket »

righto just a thought. prob a hard job unless i had a front cut or similar. just weighing up a few options. prob stick with the 5spd and fix few things on the motor. only really the valve stem seals which i might just get the heads reco'd and be nice and clean up top.
"If it ain't broken, smash it harder, then make it stronger!"
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 1 guest