Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
v6 3000 5spd --> v6 3000 auto
Moderator: -Scott-
v6 3000 5spd --> v6 3000 auto
How much differance would there be in order to do this?
"If it ain't broken, smash it harder, then make it stronger!"
Firstly you will need the t/case with the auto as well (a 5sp t/case will not mate to an auto).
The engine ECU is different than a 5sp I think mainly for the kickdown function.
Console is different as well then you need pedals.
Fark the more I think about it I just don't think it's worth the effort and $$$$
The engine ECU is different than a 5sp I think mainly for the kickdown function.
Console is different as well then you need pedals.
Fark the more I think about it I just don't think it's worth the effort and $$$$
I just luv my "clacker Jabber"
righto just a thought. prob a hard job unless i had a front cut or similar. just weighing up a few options. prob stick with the 5spd and fix few things on the motor. only really the valve stem seals which i might just get the heads reco'd and be nice and clean up top.
"If it ain't broken, smash it harder, then make it stronger!"
Who is online
Users browsing this forum: No registered users and 0 guests