Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ clock

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 25
Joined: Tue Oct 12, 2004 3:18 pm

GQ clock

Post by Paps »

I know this is probably pretty trivial, but does anyone know what the problem is with the clock in GQ's and how do you fix it? I don't know anyones that works.
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Remove
Resolder all connections

replace

Should fix the common faults they get

Bazzle
Top
Posts: 176
Joined: Wed Jun 09, 2004 8:43 pm
Location: South Brisbane

Post by shortgq »

know what ya mean mine comes and goes, the screen that is, but it holds time, so i guess the connections to the screen are dodgy, i'm gonna fix it up along with a few cosmetic things when i pull the dash out to install din uhf and remove old security system still wired in....
Top
Posts: 2097
Joined: Mon Jun 14, 2004 8:06 pm
Location: Land of Plenty

Post by blkmav »

That's about the only standard fault my Mav doesn't have.

Just had the odometer/trip meter fixed.
Weekdays - Prado GXL D4D with some stuff
Weekends - Mav shorty with lots of stuff
Top
Posts: 85
Joined: Wed Jun 02, 2004 11:26 am
Location: Homeless

Post by Dirty Dave »

blkmav wrote:That's about the only standard fault my Mav doesn't have.

Just had the odometer/trip meter fixed.


How much did the odometer cost ya...did you buy a newski or get someone to fix it???
For I just bent over for a newski!!!
Xtreme Bolt on Bandit....and your mum loves it!!!
Top
Posts: 2097
Joined: Mon Jun 14, 2004 8:06 pm
Location: Land of Plenty

Post by blkmav »

Dirty Dave wrote:How much did the odometer cost ya...did you buy a newski or get someone to fix it???


Got it fixed, getting the bill tomorrow
Weekdays - Prado GXL D4D with some stuff
Weekends - Mav shorty with lots of stuff
Top
Posts: 4323
Joined: Wed Dec 11, 2002 8:42 am
Location: Gold Coast, Queensland

Contact:
Contact HeathGQ

Post by HeathGQ »

my odometer cost about $200 from memory.

The clock I actually fixed by WD40. DOtn know why that worked as such, but its been on now for about 8mths, so I aint touching again till it stops.
Heath & Melissa - 93 GQ LWB.
Top
Posts: 176
Joined: Wed Feb 04, 2004 12:18 pm
Location: licking windows

Post by slacker »

this seems to be a pretty common problem with the GQ's, both mine and a mates clocks dont work. When a mate was looking for a GQ/Mav to buy all of them except one the clocks didnt work. It wil be on the to do list.
Top
Posts: 2915
Joined: Tue Oct 05, 2004 11:29 am
Location: Sunshine Coast

Post by Bingham »

probly be cheaper to buy a watch,

i did mines stuffed also :D

Bingham
2015 200 Series Gx TTD - ................ Fark 3L's -
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

so to the connections that need to be resoldered for this are just on the back of the clock?
mine is comming and going.... just another small thing id like to fix.

cheers
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Screwy_ScrewBall wrote:so to the connections that need to be resoldered for this are just on the back of the clock?
mine is comming and going.... just another small thing id like to fix.

cheers

yea, its common as corrupt cops for them to die...
apparently you can spray some stuff on them that shows you the broken joints, or just resolder the lot I say!
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

bogged wrote:
Screwy_ScrewBall wrote:so to the connections that need to be resoldered for this are just on the back of the clock?
mine is comming and going.... just another small thing id like to fix.

cheers

yea, its common as corrupt cops for them to die...
apparently you can spray some stuff on them that shows you the broken joints, or just resolder the lot I say!


sweet as thanks man.

If ya havnt noticed, just got a new GQ, i know my MQs but theres alot to learn with the GQs :D
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Screwy_ScrewBall wrote:If ya havnt noticed, just got a new GQ, i know my MQs but theres alot to learn with the GQs :D


like going back to school!
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

bogged wrote:
Screwy_ScrewBall wrote:If ya havnt noticed, just got a new GQ, i know my MQs but theres alot to learn with the GQs :D


like going back to school!


indeed :D
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 569
Joined: Sun Jan 11, 2004 11:36 am
Location: Sunshine Coast QLD

Post by Mark2 »

Have just fixed 2 GQ clocks.......

There is a large resistor on the back of the board (I think its the largest) and one or both of these solder joints will be the problem. To test, pull the clock apart (will have to pry open some small clips with a small screwdriver once you remove the fascia panel), plug back in and push or wobble this large resistor slightly with your finger. The clock should come good. In both my cases, I could see a slight crack in the solder joint. Just heat this joint with a soldering iron and no more problems.

The job takes no more than about 20 mins.
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

slacker wrote:this seems to be a pretty common problem with the GQ's, .

talkin to a bloke at club property about them, he got his GQ new, and it died within 3 mths the first time, then 8 mths, then he gave up, bought a $5 watch from the markets, double sided tape, and its still going.
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

Thanks MARK2 and othere for the info.
might go out and fix it tomorrow.

cheers
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

FIXED IT :D :D :D

cheers
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 1897
Joined: Thu Aug 05, 2004 6:24 am
Location: of the best barwork is at www.bolsys.com.au

Post by 80lsy gq »

my clock makes me late all the time....it comes and goes and when it does work it just adds an hour when it feels like it...might get around to fixin it by next xmas :oops: .....
www.bolsys.com.au

the original and the best
Top
Posts: 1552
Joined: Wed Dec 22, 2004 12:09 pm
Location: im at wello point

Post by bilby »

nope my clock works fine just is a bit dull when u fire it up every now and then but thats it . had it 3yrs now ~~~ 90 , lwb wagon with the stabalizer release bar ?? :roll:
damn missus and kids stopping me buying more toys
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

bilby wrote:nope my clock works fine just is a bit dull when u fire it up every now and then but thats it . had it 3yrs now ~~~ 90 , lwb wagon with the stabalizer release bar ?? :roll:
damn missus and kids stopping me buying more toys


Mine has the stabaliser release bar, auto areal, factory rear diff lock etc.
and the clock failed. Its fixed now :D

Not sure wat model i have though.. DX,ST,TI.......
doesnt have leather but it fully carpeted etc...

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 1552
Joined: Wed Dec 22, 2004 12:09 pm
Location: im at wello point

Post by bilby »

screwy mine is fully carpeted too dont have a clue what model it is either ?? no factory diff lock thou ! think its a ST not sure :D
just a little left of insanity :)
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

bilby wrote:screwy mine is fully carpeted too dont have a clue what model it is either ?? no factory diff lock thou ! think its a ST not sure :D


maybe put up a post and ask the question???
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 148 guests