Basically the Feroza has the engine set up for torque and the Detomaso is for top end power.
Yes the detomaso engine has more top end 92Kw @ 6000rpm compared 2 the ferozas 70Kw @ 5700rpm
But I disagree with u on the torque because the detomaso has 144Nm @ 4000rpm from memory and the feroza has only got 128 @ 4800rpm which means the detomaso has got more torque lower in the rev range
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Got bored today....
Moderator: Tiny
rocknferoza wrote:Basically the Feroza has the engine set up for torque and the Detomaso is for top end power.
Yes the detomaso engine has more top end 92Kw @ 6000rpm compared 2 the ferozas 70Kw @ 5700rpm
But I disagree with u on the torque because the detomaso has 144Nm @ 4000rpm from memory and the feroza has only got 128 @ 4800rpm which means the detomaso has got more torque lower in the rev range
Actually I was talking torque curves, rather than peaks, and didn't say the Feroza had more torque! Torque and max power are related- so it stands to reason the Detomaso would have a higher peak torque. I imagine however the spread of torque would be vastly different to a Feroza.
It would probably be a better comparison to use the standard Applause engine anyway- I believe it has the same maximum power (???)
Here is a link to Tighe cams with the different specs for each cam:
http://tighecams.com.au/profiles2/daihdith16v.htm
David
It does seem to respond quicker to light throttle input and rev out better. Power seems to be increased too. Hard to say if it's the TB mod or the injectors being cleaned though?!? Stu has sent me some counter sunk M3.5 bolts, so I'll be putting them in soon to finish it all off.
If only I had free access to a chassis dyno like I used to That was a handy tool for comparing mods like this one.
If only I had free access to a chassis dyno like I used to That was a handy tool for comparing mods like this one.
David
Who is online
Users browsing this forum: No registered users and 24 guests