Anyone know the name of the Calmini importer in Perth?
Has only recently started importing by the sound of it.
While I'm here, does air bubbles in the radiator over flow only mean a blown head gasket and/or cracked head, or could it be something minor.
Have replaced radiator cap, but still doing it, no temp rise and starting to use a little water.Been like this a week now.
Might be an excuse to take it off the road shortly and do some of the mods I wanted. (SAS on the cards at the mo' just trying to track best axle setup and see what gremlins might appear after doing this)
Thanks in advance,
Dave
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Calmini importer?
Moderator: Moderators
four wheel drive usa the guy that runs it is eddie vilanova he has been importing calmini stuff for quite sum time im waitin for some stuff from the us to as hes has got containers comming to perth reguarly!. as for ur rad take the cap of while its running and on temp if ya see bubbles comming up u have done a head gasket!
No special reason for the Perth dealer, they were the only ones I had heard about.
Still tossing up on whether to go SAS or not yet, truck still has a 2 year warranty so looking at a Calmini lift, rear bumper,LSD and hubs.
Its either this or I am trying to find more info on TRAC suspension (Japan)
Would like to go SAS but a few guys in the US are still having probs with their setups, so might try to keep it simple. Price might be the major factor with Calmini though, probably quite pricey.
Seeing what my weight limit with Air NZ is also, as Im hoping to be in Perth later this year.
Dave
Still tossing up on whether to go SAS or not yet, truck still has a 2 year warranty so looking at a Calmini lift, rear bumper,LSD and hubs.
Its either this or I am trying to find more info on TRAC suspension (Japan)
Would like to go SAS but a few guys in the US are still having probs with their setups, so might try to keep it simple. Price might be the major factor with Calmini though, probably quite pricey.
Seeing what my weight limit with Air NZ is also, as Im hoping to be in Perth later this year.
Dave
Who is online
Users browsing this forum: No registered users and 1 guest