Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Calmini importer?

Tech talk for GMH/Isuzu and Great Wall owners

Moderator: Moderators

Post Reply
Posts: 480
Joined: Thu Jan 30, 2003 4:22 pm
Location: New Zealand

Calmini importer?

Post by KIWI »

Anyone know the name of the Calmini importer in Perth?
Has only recently started importing by the sound of it.
While I'm here, does air bubbles in the radiator over flow only mean a blown head gasket and/or cracked head, or could it be something minor.
Have replaced radiator cap, but still doing it, no temp rise and starting to use a little water.Been like this a week now.
Might be an excuse to take it off the road shortly and do some of the mods I wanted. (SAS on the cards at the mo' just trying to track best axle setup and see what gremlins might appear after doing this)

Thanks in advance,
Dave
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

four wheel drive usa the guy that runs it is eddie vilanova he has been importing calmini stuff for quite sum time im waitin for some stuff from the us to as hes has got containers comming to perth reguarly!. as for ur rad take the cap of while its running and on temp if ya see bubbles comming up u have done a head gasket!
User avatar
cbr
Posts: 644
Joined: Mon Oct 21, 2002 1:14 am
Location: Perth

Post by cbr »

What bazooked said. Here is the address and phone number

4 WHEEL DRIVE U.S.A.
1a Chalkley Pl Bayswater 6053 W.A. ( 08 ) 9370 3440

Chris.
Posts: 507
Joined: Tue Nov 26, 2002 6:32 pm
Location: Nannup, Western Australia

Post by Westoztroopa »

So spit it out Dave, what are you looking at getting from Calmini?

Why do you want the Perth dealer? I believe there are outlets for Calmini on the east coast...

Noel
Posts: 480
Joined: Thu Jan 30, 2003 4:22 pm
Location: New Zealand

Post by KIWI »

No special reason for the Perth dealer, they were the only ones I had heard about.
Still tossing up on whether to go SAS or not yet, truck still has a 2 year warranty so looking at a Calmini lift, rear bumper,LSD and hubs.
Its either this or I am trying to find more info on TRAC suspension (Japan)
Would like to go SAS but a few guys in the US are still having probs with their setups, so might try to keep it simple. Price might be the major factor with Calmini though, probably quite pricey.
Seeing what my weight limit with Air NZ is also, as Im hoping to be in Perth later this year.

Dave
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

we might have to team up with all the perth boys and take ya out for a scenic drive!!
Posts: 507
Joined: Tue Nov 26, 2002 6:32 pm
Location: Nannup, Western Australia

Post by Westoztroopa »

KIWI wrote:Seeing what my weight limit with Air NZ is also, as Im hoping to be in Perth later this year.

Dave


Yeh, I think you may be pushing it a bit trying to get the Bighorn through on hand luggage... Hehe :lol:

Noel
Posts: 281
Joined: Tue Jan 28, 2003 10:02 pm
Location: inner west

Post by CJ Burns Esq »

Kaos 4x4 in Canberra do Calmini as well. They have an affiliation with ACTJeepTraction of which some of us are memebers.
CJ
CJ
http://www.4wdlinks.com.au/gallery/cjburns7
http://cjburns7.tripod.com
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest