Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

63" Chev springs specs

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

63" Chev springs specs

Post by spazbot »

I need the specs for the 63" chev springs i have been seaching and all i can find is 63" eye to eye and 2 1/2" wide

I need/want to know the lengths and thickness of each spring in the pack and where the center pin is positioned.

If not i might have to do a run and get the tape measure out on cplux's
www.overkill4x4.com
ph 94766137
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

at the risk of "being labelled"

the chevys are:
63" eye to eye
the centre pin is "in the centre"

sorry, im just being simple, there is a picture on pirate4x4, do a search in the minitruck section, heaps of tech :P
hands and mums dont count!!!
Top
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

yes i know, but i need the lenghts of the individual leafs and thier thicknesss , i havent been able to find this on pirate yet, as its not a common thing for a yank to get them made when they can pick em up for $100
www.overkill4x4.com
ph 94766137
Top
Posts: 398
Joined: Fri Oct 25, 2002 5:40 am
Location: near gosford,central coast, nsw

Post by cplux »

10mm leaves 3 of very soft
Top
Posts: 398
Joined: Fri Oct 25, 2002 5:40 am
Location: near gosford,central coast, nsw

Post by cplux »

correction 3/8" we are american after all.
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

hey y'all
hands and mums dont count!!!
Top
Posts: 8
Joined: Sat Nov 02, 2002 2:25 pm
Location: Portland Or. Usa

Post by tomota »

Check outhttp://home.off-road.com/~bibelheimer/toyota_info.html
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

1st leaf is 63inch eye to eye and the pin is in the middle, 10mm thick has a rate of 320 pounds and an unloaded arch of 11 inch

2nd leaf is 54.5 inch long has a rate of 280 pounds

3rd leaf is 45 inch long and also has a rate of 280pounds and has a clamp near the end the wraps all 3 leafs together.

The spring rates on the chevys are allittle higher than the toyotas but it is due to the lynial (sp?) lenght of the spring that they flex so well.



NICK
TECH SCREW GURU
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 40 guests