63" Chev springs specs

Post by **spazbot** » Fri Nov 15, 2002 1:27 pm

I need the specs for the 63" chev springs i have been seaching and all i can find is 63" eye to eye and 2 1/2" wide

I need/want to know the lengths and thickness of each spring in the pack and where the center pin is positioned.

If not i might have to do a run and get the tape measure out on cplux's

Post by **bj on roids** » Fri Nov 15, 2002 2:17 pm

at the risk of "being labelled"

the chevys are:
63" eye to eye
the centre pin is "in the centre"

sorry, im just being simple, there is a picture on pirate4x4, do a search in the minitruck section, heaps of tech

Post by **spazbot** » Fri Nov 15, 2002 2:50 pm

yes i know, but i need the lenghts of the individual leafs and thier thicknesss , i havent been able to find this on pirate yet, as its not a common thing for a yank to get them made when they can pick em up for $100

Post by **cplux** » Fri Nov 15, 2002 3:09 pm

10mm leaves 3 of very soft

Post by **cplux** » Fri Nov 15, 2002 3:13 pm

correction 3/8" we are american after all.

Post by **bj on roids** » Fri Nov 15, 2002 4:39 pm

hey y'all

Post by **tomota** » Sat Nov 16, 2002 2:12 pm

Check outhttp://home.off-road.com/~bibelheimer/toyota_info.html

Post by **NICK** » Sat Nov 16, 2002 5:10 pm

1st leaf is 63inch eye to eye and the pin is in the middle, 10mm thick has a rate of 320 pounds and an unloaded arch of 11 inch

2nd leaf is 54.5 inch long has a rate of 280 pounds

3rd leaf is 45 inch long and also has a rate of 280pounds and has a clamp near the end the wraps all 3 leafs together.

The spring rates on the chevys are allittle higher than the toyotas but it is due to the lynial (sp?) lenght of the spring that they flex so well.

NICK

Outer Limits 4x4 Board

63" Chev springs specs

63" Chev springs specs

Who is online