Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
information on gearbox stealing oil from xfer case on 40 ser
Moderators: toaddog, Elmo, DUDELUX
information on gearbox stealing oil from xfer case on 40 ser
hey people, any help would be good thanks.
my gearbox keeps taking the oil from my xfer case i believe... apparently it is a problem that alot of 40's have? its a 5speed yoto box... there is apparently a pipe that you can buy that will level out the oil in both the gear box and the transfer case? has anyone tried these? are they worth it? or should i just keep changing the oil more regularly? the only thing is tho i only changted the oil not all that long ago?
and also... is the rear output shaft seal hard to change on a xfer case? i'm leaking!
cheers....
andrew
my gearbox keeps taking the oil from my xfer case i believe... apparently it is a problem that alot of 40's have? its a 5speed yoto box... there is apparently a pipe that you can buy that will level out the oil in both the gear box and the transfer case? has anyone tried these? are they worth it? or should i just keep changing the oil more regularly? the only thing is tho i only changted the oil not all that long ago?
and also... is the rear output shaft seal hard to change on a xfer case? i'm leaking!
cheers....
andrew
Fj40 '84, 2F. PWS, 2" extended shackles, detroit rear, soon lockrite front. huge 31" tires :( one day some big mothers!
Re: information on gearbox stealing oil from xfer case on 40
tukadafoonday wrote:there is apparently a pipe that you can buy that will level out the oil in both the gear box and the transfer case?
Just fit the equalizer pipe it's quick and easy to do.
www.bolsys.com.au
shorty_f0rty wrote:had the same problem.. when i took it in there was only about 1lt of oil left out of about 9lt's i think..
I got it done properly for about $1750.. full transfer rebuild with new rear seal, rear bearings, etc..
no leaks so far thank god and no issues with it since..
Even after having spent this money i would fit a Transfer hose. It is realy common for the cruiser Transfer to feed its oil into the gearbox and its realy cheap insurance. Without one you could quite easily be up for another $1750 re-build in no time.
RUFF wrote:shorty_f0rty wrote:had the same problem.. when i took it in there was only about 1lt of oil left out of about 9lt's i think..
I got it done properly for about $1750.. full transfer rebuild with new rear seal, rear bearings, etc..
no leaks so far thank god and no issues with it since..
Even after having spent this money i would fit a Transfer hose. It is realy common for the cruiser Transfer to feed its oil into the gearbox and its realy cheap insurance. Without one you could quite easily be up for another $1750 re-build in no time.
*sigh*
and here I was thinking I did the right thing from what I've read it does seem to happen every 100,000km's or so i think but now at least i know when it was last done now as I had nfi before.
Im here for the sausage!
If you fit the seal from a HZJ75 1990 and later that seperates the gearbox from the transfer the problem is fixed they have a double lip seal with garter spring on both sides. Looks like 2 seals back to back. If mechanically minded should take about 4 hours, new seal ~$20.00 and oil for transfer and gear box. I alway's fit this seal as i run 80w90 oil in the transfer and 75w80 in the gear box so they shift heaps better especially when cold. Because i use different oils the seal had to work.
Wally
Wally
Who is online
Users browsing this forum: No registered users and 2 guests