Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Ok what is it worth - i know it would be worth fark all but here it goes
1985 4 Runner
2L Diesel - 25,000 km's on new engine
5 Speed
4.88 Diffs
ARB Bull Bar
Kaymar Rear Bar
31's
Stockish Suspension
CD Player
No Rust
Safari Snorkle
buds4x4 cross member
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!
LN46 Hilux - $2500
Longs - $800
Duals + Gear Set - $1200
ARB Front - $1500 with compressor on a bad day
Spool Back - $300
Cross over - $1000 - double arm including huge price for pump - box - resivor
Put my current mazda;s in back
Rears in front
$7300 - i think it would be hell of a lot more capable than the runner
and i know it will probably add up to more with all the little bits
later on
38's
Hysteer
A Frame rear
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!
LN46 Hilux - $2500 Longs - $800 Duals + Gear Set - $1200 ARB Front - $1500 with compressor on a bad day Spool Back - $300 Cross over - $1000 - double arm including huge price for pump - box - resivor Put my current mazda;s in back Rears in front
$7300 - i think it would be hell of a lot more capable than the runner and i know it will probably add up to more with all the little bits
LN46 Hilux - $2500 Longs - $800 Duals + Gear Set - $1200 ARB Front - $1500 with compressor on a bad day Spool Back - $300 Cross over - $1000 - double arm including huge price for pump - box - resivor Put my current mazda;s in back Rears in front
$7300 - i think it would be hell of a lot more capable than the runner and i know it will probably add up to more with all the little bits
later on 38's Hysteer A Frame rear
Nice move BUBS!!!!
i think so
and i will run my little 33" MT/Rs till $'s permit
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!
www.redbook.com.au should be able to give you a good base price guide for the rig, then just add your mods etc and you should have a pretty good idea of market price.
www.autotrader.com.au also has a section where you can look up how much vehicles have sold for (2nd hand) over the last 12 months.
LN46 Hilux - $2500 Longs - $800 Duals + Gear Set - $1200 ARB Front - $1500 with compressor on a bad day Spool Back - $300 Cross over - $1000 - double arm including huge price for pump - box - resivor Put my current mazda;s in back Rears in front
$7300 - i think it would be hell of a lot more capable than the runner and i know it will probably add up to more with all the little bits
later on 38's Hysteer A Frame rear
Nice move BUBS!!!!
i think so
and i will run my little 33" MT/Rs till $'s permit
I think the MTRs will be fine and i think its a good plan. And you come out $700 ahead and can drive corys rig around for a while ROFL 8)
Bubs
Welcome to the 83 club. Well soon anyway. Speaking from my experience....They look great They handle well once you've made the minor changes like getting rid of that Pissy J arm & torsion bar. You can do sooo much to them. They are a bit light in the arse though. Chuck heaps o' sheit in the back & it'll be sweet.
If you do find one...make sure you pull back the lino on the floor to check for heavy rust. They tend to start there on those models.
Zol wrote:Bubs Welcome to the 83 club. Well soon anyway. Speaking from my experience....They look great They handle well once you've made the minor changes like getting rid of that Pissy J arm & torsion bar. You can do sooo much to them. They are a bit light in the arse though. Chuck heaps o' sheit in the back & it'll be sweet.
If you do find one...make sure you pull back the lino on the floor to check for heavy rust. They tend to start there on those models.
i used to own one - 82 with 86 2L, 4 speed with a hiace 5th gear in it etc - was pretty stock 31's alloy tray
now ruuns on 33's and still pulls a nice skid - for a diesel
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!