http://beor.org/mahnamahna/mahnamahna.wmv
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
No BFG's or STT's until the end of the year!!!! (33's)
Moderators: toaddog, TWISTY, V8Patrol, Moderators
80lsy gq wrote:well i just got a set of cooper stt's..............
now about those irocs???????????????????????????????????
Bingham wrote:ryano i would normally pm this but thought it may be of interest availability wise to others on this thread.........
those claws you put on chris's 80 (bought 90-95%) he wants to trade in on the new coopers muddies for hiway traveling reasons, of the same size 305/75/16 or is there a size in between the 315's as doesnt want that big again..........
let us know on here availability wise as it may be of interest toa few of the lads and pm me please oh RUBBER GOD
The 285/75R16 STT is available now (33x11.50R16 roughly).
Unfortunately due to the strike in the States recently, production on the 305/70R16 (33x12.50R16) and 315/75R16 (35x13.00R16) has been pushed back quite a ways in order to get the full flow on the sizes that have been released already. Guess-timation on time is early next year.
Cheers,
Ryano
Cossie wrote:80lsy gq wrote:well i just got a set of cooper stt's fitted to my pootrol from Ryano the rubber god and i went wheelin the other weekend and i drove everywhere that my 34 jts used to at 15psi and i didnt even let the stt's down at all...still had 38 psi in them....and on top of that they handle good on the road and i dont have to fark around and change tyres anymore as well...
now about those irocs???????????????????????????????????
what size STT's?
285/75/16s .......
www.bolsys.com.au
the original and the best
the original and the best
rick130 wrote:doesn't appear to be any 255/85/16 size in the new STT either, so I'm sorta limited to the BFG MT or Cooper ST's in that size in the future......
rick, i was in tyrepower today and apparently bfg don't do a 255/85-r16 anymore. so does any one know of a tall, narrow(up to 265) 16 inch radial. also i guy on the job site next to mine had some simex centerpede mt radials in 31/10.5r15 looked pretty good and were only $130.
serg
uninformed wrote:rick130 wrote:doesn't appear to be any 255/85/16 size in the new STT either, so I'm sorta limited to the BFG MT or Cooper ST's in that size in the future......
rick, i was in tyrepower today and apparently bfg don't do a 255/85-r16 anymore. so does any one know of a tall, narrow(up to 265) 16 inch radial. also i guy on the job site next to mine had some simex centerpede mt radials in 31/10.5r15 looked pretty good and were only $130.
serg
That is a shame, the 255/85 was a good size for defenders.
However a 285/75 can fit on pretty easily. I run 285/75 MTR's on my 110 on disco steel rims with 30mm extra offset. Very happy with them - about the same diameter as a 255/85, just 1" wider.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
I have a set of bfg mt's 33x12.5x15 and they have become oval shaped they cause a vibration from 80 to 100kph. They have been rotated and balanced every 10000 and i run 33psi has anyone else had this problem and how can i fix them so they make less vibration?
GQ 4.2 turbo diesel patrol 3" lift 33"muds
i was in tyrepower today and apparently bfg don't do a 255/85-r16 anymore
Oh tell me it aint so !
Looks like a call to the bloke I bought mine off is in order, he's about the biggest retailer of BFG in NSW, although I'm still a few months away from needing/affording another set.
Ben , 285's would be fine, but I'd have to get the rims widened. (though extra offset would be nice, ifthe bloody narrow hubs can cope)
Muddies,
As to the balance issue, yep, been there. Just keep taking them back, it is a dynamic balance issue. I have a good tyre bloke who persevered and we got it in the finish. We also swapped the tyres side to side (changed on the rims) to beat the alternate scalloping of the lugs you described in the other post.
300Tdi Defender 130 CC
Fella's, received this email fom Michelin today re the 255/85/R16 M/T's
Hi Rick,
Yes, the LT255/85 R 16 119Q MUD/TER T/A is still available in Australia.
For price and availability on the BFG range, contact your nearest Authorised
Michelin / BFG Dealer on 13 13 10.
Regards.
-------------------------------------------------------------
Passenger Car & Light Truck Department
Michelin Australia Pty Ltd / BF Goodrich
Call 13 13 10 for your nearest Authorised Michelin
Dealer or visit www.michelin.com.au
-------------------------------------------------------------
300Tdi Defender 130 CC
rick130 wrote:Ben , 285's would be fine, but I'd have to get the rims widened. (though extra offset would be nice, ifthe bloody narrow hubs can cope)
I run mine on 7" rims. Although not recommended (7.5" min in specs), they sit nice and flat, balanced fine, have been wearing perfectly, and hold the bead well, even at 8 psi (non-beadlocked).
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Who is online
Users browsing this forum: No registered users and 3 guests