Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

flat spots in accelerating

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 239
Joined: Sat May 21, 2005 8:30 pm

flat spots in accelerating

Post by Crawford »

hey i went for a bit of a 4wd with a mate just around dunes..

now whenever i accelerate there is really bad flat sots.. revs like 1000rpm before acceleration kicks in!!!

will this fix up after engine cools down?

i did thrash my car a lot

let me know
cheers
Posts: 167
Joined: Sun Mar 28, 2004 7:32 pm
Location: Townsville

Post by Toos »

Bit of crap in your carby probably.
4 Pot Screama
Posts: 239
Joined: Sat May 21, 2005 8:30 pm

Post by Crawford »

revving the guts out of it to get up dunes etc wouldnt have done it?
Posts: 2001
Joined: Wed May 26, 2004 9:47 pm
Location: sydney

Post by runnin4life »

Crawford wrote:revving the guts out of it to get up dunes etc wouldnt have done it?
maybe driving on the dunes may have mixed up all the crap in the tank and it got through the filter
Posts: 239
Joined: Sat May 21, 2005 8:30 pm

Post by Crawford »

how do i fix up?
the fuel tank is on empty pretty much maybe just fill that up lol
Posts: 1242
Joined: Fri Oct 17, 2003 8:50 pm
Location: Kanwal

Post by ZOOK60 »

if you were any where near the beach you may have sand blocking one of your jets in the carby :cry:
P.E.T.A
People eating tasty animals.
Posts: 443
Joined: Tue Oct 12, 2004 10:45 am
Location: Sailsbury-Brisbania

Post by JrZook »

What was the temp guage like anyway???
Posts: 239
Joined: Sat May 21, 2005 8:30 pm

Post by Crawford »

temp guage was only on a quarter to a halve..

is there anyway of getting that sand out? i got crc carby cleaner left over somewhere

let me know fellas
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Try read the bible on carby bits first.

Also try:

hand over carby wilst reving so it creates a vacume and sucks the crap through
open the front screws on the float bowl and drain the fuel bowl and clean with carbycleaner .
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 113
Joined: Tue Jul 06, 2004 2:40 pm
Location: Noumea, New Caledonia

Post by ZookNC »

Open the carby up and clean it, or have it done, and you should be right. and put a new fuel filter on it !! :D
Also check that nothing has come loose, particularly the bolts holding the carb to the manifold as well as the manifold bolts.

Hope this helps !
Froggy
98 Sierra / Samurai
2 inch suspension lift
Warn winch
Lots of "home made" accessories
Oh, and a Mazda BT-50 dual cab ute...
Post Reply

Who is online

Users browsing this forum: No registered users and 69 guests