Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
flat spots in accelerating
flat spots in accelerating
hey i went for a bit of a 4wd with a mate just around dunes..
now whenever i accelerate there is really bad flat sots.. revs like 1000rpm before acceleration kicks in!!!
will this fix up after engine cools down?
i did thrash my car a lot
let me know
cheers
now whenever i accelerate there is really bad flat sots.. revs like 1000rpm before acceleration kicks in!!!
will this fix up after engine cools down?
i did thrash my car a lot
let me know
cheers
Try read the bible on carby bits first.
Also try:
hand over carby wilst reving so it creates a vacume and sucks the crap through
open the front screws on the float bowl and drain the fuel bowl and clean with carbycleaner .
Also try:
hand over carby wilst reving so it creates a vacume and sucks the crap through
open the front screws on the float bowl and drain the fuel bowl and clean with carbycleaner .
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Open the carby up and clean it, or have it done, and you should be right. and put a new fuel filter on it !!
Also check that nothing has come loose, particularly the bolts holding the carb to the manifold as well as the manifold bolts.
Hope this helps !
Also check that nothing has come loose, particularly the bolts holding the carb to the manifold as well as the manifold bolts.
Hope this helps !
Froggy
98 Sierra / Samurai
2 inch suspension lift
Warn winch
Lots of "home made" accessories
Oh, and a Mazda BT-50 dual cab ute...
98 Sierra / Samurai
2 inch suspension lift
Warn winch
Lots of "home made" accessories
Oh, and a Mazda BT-50 dual cab ute...
Who is online
Users browsing this forum: No registered users and 70 guests