Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Jimny Question

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 88
Joined: Thu Jun 16, 2005 12:21 pm
Location: BRISBANE SUNNY QLD

Jimny Question

Post by MissJimny »

Hi All

I purchased a new Jimny at Xmas and I was just wondering if it was normal for it to rev out at 4k when I am doing 100km/hr (Yes it's in 5th gear)

Thanks :D
SARAH
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Post by alien »

all zuk's like to rev... not sure about 4k though?

mine sits on about 3400rpm in 5th doing 100. however i am running larger tyres and no gearing to compensate - so id expect it should be about 3700 on stock tyres.
The worst thing about censorship is ███████.
Posts: 56
Joined: Mon Aug 23, 2004 12:47 pm
Location: Auckland, NZ

Post by Fourdogs »

A smigen under 4000 is about right for a jimny.
[url]http://www.project-tinfoil.co.nz[/url]
Posts: 529
Joined: Thu Jun 03, 2004 6:07 am
Location: SEQ

Post by munga »

just a point of reference: my 1lt does about 4500 @ 100kph
i got it off the dial (125maybe) and we were pushing somewhere near 5300
ht zook with bog, rust and mt's

this is my wheelbase |<-------->|
Posts: 55
Joined: Fri Jul 02, 2004 1:24 am

Post by salli »

yep thats what a jimny is like ,i have 2001 model a m13a engine which is the dohc motor and its a manual ,so has the 3.909 diff ratio and mine does about 4300 rpm at 110kph.
Posts: 56
Joined: Sat Jul 02, 2005 10:10 am
Location: nowra NSW

Post by bozwon »

salli wrote:yep thats what a jimny is like ,i have 2001 model a m13a engine which is the dohc motor and its a manual ,so has the 3.909 diff ratio and mine does about 4300 rpm at 110kph.
youll prolly find you have a 4.09 diff ratio (45 teeth on crown wheel n 11 on the pinion) my 04 model does when the documentation said 3.909

that rev range sounds about right.

they make peak torque (110nm) at 4500rpm i think
and peak power (60kw) at 5500 rpm

i would take mine 4 a run but the gearing is out so 100 on the speedo is like 125 kph
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Post by Shorty40 »

Mine has the Jimny M13A DOHC but I am scared to take it over 40kph :oops:
Posts: 88
Joined: Thu Jun 16, 2005 12:21 pm
Location: BRISBANE SUNNY QLD

Post by MissJimny »

Thanks for that guys... now I wont be scared on the highway... lucky I have my CD player to drown out the noise!!! :P
Posts: 56
Joined: Sat Jul 02, 2005 10:10 am
Location: nowra NSW

Post by bozwon »

XXX wrote:Thanks for that guys... now I wont be scared on the highway... lucky I have my CD player to drown out the noise!!! :P
noise?
nes really quiet even with 33' mongrels
Posts: 88
Joined: Thu Jun 16, 2005 12:21 pm
Location: BRISBANE SUNNY QLD

Post by MissJimny »

The engine sounds loud when going 100km/hr - just the sound of the engine reving - it's not too loud - but loud enough to be annoying! Should I ask the dealership about it, or wait for a service - I have had the first 1000 km service - the next ones not due until 15000km (I have had it 6 moths and have done just over 9000km)
Posts: 421
Joined: Wed May 25, 2005 11:41 am
Location: Mutdapilly QLD :-)

Post by xrdave »

Sounds like a Jimny thing. :scrambleup:
It may be that your sole purpose in life is simply to serve as a warning to others.
Posts: 56
Joined: Sat Jul 02, 2005 10:10 am
Location: nowra NSW

Post by bozwon »

they dont actually do anything at the 1st service.

i service mine every 5000kms or so cause im offroad a lot which stresses the engine more then driving on a highway.

i always found mine to be very quiet but that could be because all of my other cars have either been crap and loud or had aftermarket exhausts fitted
Post Reply

Who is online

Users browsing this forum: No registered users and 39 guests