Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Defender Body Compression

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 29
Joined: Fri Mar 25, 2005 3:23 pm

Defender Body Compression

Post by 4wdn00b »

Everytime i seem to go offroading, i notice that the body of my defender compresses. Usually i just hear the noises of the door seals. But today i got out of the car to have a look at my articulation, and had trouble opening and closing the door.

Just wondering if anyone else notices this?
Top
Posts: 691
Joined: Thu Dec 26, 2002 11:21 pm
Location: Lebanon

Contact:
Contact DiscoDino

Post by DiscoDino »

quite normal...
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Top
tim
Posts: 47
Joined: Tue Apr 06, 2004 11:14 pm
Location: UK

Post by tim »

That's why they are built with huge panel gaps.

Tim
Life's too short for a full time job
Top
Posts: 1590
Joined: Fri Jun 03, 2005 7:07 pm
Location: Tarneit, Vic

Post by matt.mcinnes »

tim wrote:That's why they are built with huge panel gaps.

Tim
I thought that was just British engineering :rofl:
http://www.fj40-2f-eti-locked-n-loaded.com

Advanced (HB) Intercoolers
http://advancedhbintercoolers.com
Top
Posts: 268
Joined: Tue Apr 19, 2005 7:00 pm
Location: Brisbane

Post by Rangie ute on 38'' »

fewww i have the same thing but wasnt game to say ne thing. sounds normal
Top
Posts: 145
Joined: Fri Dec 19, 2003 2:35 pm

Post by Maxtd5def »

Might be worth checking it over though - have a good look for chassis cracks, broken body mounts etc.

Regards
Max P
Stereo by Simex!
Top
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Post by Micka »

You guys must have the ones that were built on Monday mornings...

Either that, or I am not going hard enough.

Micka
Top
Posts: 135
Joined: Sat Jan 11, 2003 4:20 pm
Location: NZ

Post by lowbox »

Some decent rock sliders help strengthen the body up quite noticeably
ct
Top
Posts: 2384
Joined: Mon Mar 31, 2003 10:05 am
Location: Brisbane or 169.254.243.241

Post by RaginRover »

the rangie's front doors catch in the top of the A pillar when you pick it up but the siders have made a bit of a difference,

this is pretty much the case with every car I have owned, even my old mazda 626 used to do the same thing, although there were no sliders to
fix up the flex :armsup:

Tom
Top
HJ60_HEATHUS
Banned
Posts: 279
Joined: Wed Dec 15, 2004 7:26 pm
Contact:
Contact HJ60_HEATHUS

Re: Defender Body Compression

Post by HJ60_HEATHUS »

4wdn00b wrote:Everytime i seem to go offroading, i notice that the body of my defender compresses. Usually i just hear the noises of the door seals. But today i got out of the car to have a look at my articulation, and had trouble opening and closing the door.

Just wondering if anyone else notices this?
you forgot to mention you also had trouble reversing out after checking out your flex... ;)
Top
tim
Posts: 47
Joined: Tue Apr 06, 2004 11:14 pm
Location: UK

Post by tim »

Went to Iceland in a 110. When I came back there was no paint left on the doors inside the frames where they rubbed against the seals. Movement plus volcanis dust.

Tim
Life's too short for a full time job
Top
Posts: 107
Joined: Fri Jun 18, 2004 2:31 am
Location: Falkland Islands

Post by Nick (in the Falklands!) »

..Down here, we see quite a bit of 'compression' on the 110's that are up at the base for servicemen to hire when off duty....

(..They seem to have trouble staying on the road...)

Result...They kind of compress all over really, 'bout as wide as a Suzi Heap, short as a 90 & roof level with bonnet...that kind of thing..

(...Or was'nt that quite what you meant...???? :roll: )
Top
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Post by Micka »

I think that is 'squashed' :rofl:
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

I notice this very slightly on my IIA ute - when at maximum wheel travel bothends the door is a bit harder to open and close, but only very slightly. Don't notice it at all on my 110 county wagon though.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 918
Joined: Fri Jul 22, 2005 12:49 pm
Location: canberra

Post by 460cixy »

never had a problem with my old rangie
range rover & series one landy!
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

I am noticing similar on my 85 rangie, i can see the front screen moving in the frame. Also noticed some hairline cracks in 1 door pillar - anyone else had this with a pre 86 ( not welded together ) 4 dr rangie ?
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 532
Joined: Tue Mar 23, 2004 11:39 am
Location: Melbourne

Post by Davidh »

I get the same thing on the Disco.
Rear door gets jammed closed sometimes when you're crossed up.

I reckon the body lift probably makes it worse too.
Top
Posts: 1403
Joined: Fri Jul 11, 2003 7:59 pm
Location: Melbourne

Post by DaveS3 »

Loanrangie wrote:I am noticing similar on my 85 rangie, i can see the front screen moving in the frame. Also noticed some hairline cracks in 1 door pillar - anyone else had this with a pre 86 ( not welded together ) 4 dr rangie ?
Yeh, ANT ROVER (Anthony) had this prob. I think his Pillar almost snapped clean in half :shock:

Check them all.

Dave.
Land Rover Discovery - GQ conversion underway
Top
Posts: 2384
Joined: Mon Mar 31, 2003 10:05 am
Location: Brisbane or 169.254.243.241

Post by RaginRover »

DaveS3 wrote:
Loanrangie wrote:I am noticing similar on my 85 rangie, i can see the front screen moving in the frame. Also noticed some hairline cracks in 1 door pillar - anyone else had this with a pre 86 ( not welded together ) 4 dr rangie ?
Yeh, ANT ROVER (Anthony) had this prob. I think his Pillar almost snapped clean in half :shock:

Check them all.

Dave.
Fairly common from what I hear - grind them out and weld them up :)

Tom
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

I have not noticed anything body wise but i know the chassis twists just over an inch (both ways, so theoreticaly 2") when max articulation is weighted upon it.

Looks kinda funny when you can see the chassis out of alighnment from front to rear :)
The body rubbers must be working well.
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

AnthonyP wrote:I have not noticed anything body wise but i know the chassis twists just over an inch (both ways, so theoreticaly 2") when max articulation is weighted upon it.

Looks kinda funny when you can see the chassis out of alighnment from front to rear :)
The body rubbers must be working well.
From 86 on Rangies were spot welded together making them stiffer, the early ones only rely on rivets, self tappers and a handful of bolts !
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

Loanrangie wrote:
AnthonyP wrote:I have not noticed anything body wise but i know the chassis twists just over an inch (both ways, so theoreticaly 2") when max articulation is weighted upon it.

Looks kinda funny when you can see the chassis out of alighnment from front to rear :)
The body rubbers must be working well.
From 86 on Rangies were spot welded together making them stiffer, the early ones only rely on rivets, self tappers and a handful of bolts !
mine is an 89 :? :)
Top
Posts: 194
Joined: Tue Dec 16, 2003 5:49 pm
Location: Brisbane

Post by 110 TUFF »

yep mine does this ( only the rear door ) when realy twisted up.... ive also pop some pop rivets along the rear sides from being realy twisted up.. must flex a little hey :twisted:
MOVE OVER, HERE COMES ROVER!!!
Top
Posts: 128
Joined: Tue Dec 14, 2004 9:08 am
Location: Mooroolbark, Victoria

Post by sclarke7171 »

Shut the back door's and watch the rear quarters flex.......... there is a reason behind the sliding glass..............
1986 County, Auto, Locker, Maxi Crawler gears.
1987 RRC, Auto, Lockers, Himount. POS
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 44 guests