Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
So I decided to have a go at welding and make my own. These ones a two 65x65x3mm square hollow section welded together with a 3mm flat plate welded to the underside...
Two of the mounts. Have to finish the rest off...
I think I need a bigger trolley jack ...
A brush bar will mount onto these and help try to keep the Creepies sort of legal ...
Will post up some more pics when I have them all painted and pretty
I did the mounts again and dropped the slider by 10mm. I was still grinding and welding at 10pm the other night so I could have them finished for the WE ROCK weekend. I forgot to take some pics of them all nice and shiny...they are gloss black underneath all of this.
You can just make out some black
They are the perfect size to fit a beer on too
When I get around to cleaning it, I'll post some clean pics.
sclarke7171 wrote:Nice.... Make mine look like toys....
Thanks for posting up the pics of yours, Steve. That's what got my finger out of my arse to make them.
I'm seriously considering making a full exo-cage for it now. I am making brush-bars for the front that will incorporate flares, and after looking at it closer, there is no reason why I couldn't do the same for the rear and then continue the tube up and over the thing.
...
