Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Petrol Tank Armour or Relocation/Raise
Petrol Tank Armour or Relocation/Raise
--------------------------------------------------------------------------------
I have a few serious dints in my petrol tank. I am just wondering what others have done to either stop these dints happening or to relocate the tank all together.
My tanks capacity is reduced. i think it hold about 30lt's which is not really enough for a good days driving.
And ideas or suggestions would be much appreciated.
Simmo.
--------------------------------------------------------------------------------
I have a few serious dints in my petrol tank. I am just wondering what others have done to either stop these dints happening or to relocate the tank all together.
My tanks capacity is reduced. i think it hold about 30lt's which is not really enough for a good days driving.
And ideas or suggestions would be much appreciated.
Simmo.
--------------------------------------------------------------------------------
You do not have the required permissions to view the files attached to this post.
Hookers are like bowling balls, You pick them up, put your fingers in them, then throw them in the gutter and they come back for more.
I installed a aluplate under my tank after the rusty stock plate got ripped off.
not good pics but you get the idea, one is to show how I munted it, I bent some flat steel under the tank and monted them using the stock mounts for the tank. the aluplate is bolted to the flatsteel
ed:cant get picky to work
not good pics but you get the idea, one is to show how I munted it, I bent some flat steel under the tank and monted them using the stock mounts for the tank. the aluplate is bolted to the flatsteel
ed:cant get picky to work
You do not have the required permissions to view the files attached to this post.
413TT
413K
413K
I fitted a nissan 260C tank = 60litres into rear of tub.
possibly not relevant to hard tops etc.
there is many floor/boot mounted tanks in the wreckers, easy to bolt to a zook floor.
lwb made it easier, this tank may or may not fit a swb, but theres many different shaped tanks.
It cost me $40 and is much cleaner inside than my zook tank was, solving all my carb issues.
christover
possibly not relevant to hard tops etc.
there is many floor/boot mounted tanks in the wreckers, easy to bolt to a zook floor.
lwb made it easier, this tank may or may not fit a swb, but theres many different shaped tanks.
It cost me $40 and is much cleaner inside than my zook tank was, solving all my carb issues.
christover
You do not have the required permissions to view the files attached to this post.
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
http://www.vic.suzuki4wd.com/forum/
i will look around for a new tank and try to mount it in the standard spot, since i have a 75mm body lift i will try to rise it then a nice sheet of armour to help stop these dints from re occuring.
Anyone have a spare tank for a 84 sierra N/T.
Cheers
Simmo.
Anyone have a spare tank for a 84 sierra N/T.
Cheers
Simmo.
Hookers are like bowling balls, You pick them up, put your fingers in them, then throw them in the gutter and they come back for more.
great idea, seen it done, only prob is the filler neck, means you can't just lift it up, needs moving over, or similar, sometimes meaning exhaust mod...certainly worth doing for many reasons.84ZOOKSTA wrote:i will look around for a new tank and try to mount it in the standard spot, since i have a 75mm body lift i will try to rise it then a nice sheet of armour to help stop these dints from re occuring.
Anyone have a spare tank for a 84 sierra N/T.
Cheers
Simmo.
You need a decent gap between tank and armour, or armour will damage tank anyway.
Some of our members have used vitara tanks, because of there flatter mounting system, and bolted them thru the floor, with a false floor over the tank. 60 litres is great for the zook
christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
http://www.vic.suzuki4wd.com/forum/
Who is online
Users browsing this forum: No registered users and 58 guests