Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Petrol Tank Armour or Relocation/Raise

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 383
Joined: Fri Jul 15, 2005 7:35 pm
Location: Melbourne Victoria

Petrol Tank Armour or Relocation/Raise

Post by 84ZOOKSTA »

--------------------------------------------------------------------------------
I have a few serious dints in my petrol tank. I am just wondering what others have done to either stop these dints happening or to relocate the tank all together.

My tanks capacity is reduced. i think it hold about 30lt's which is not really enough for a good days driving.

And ideas or suggestions would be much appreciated.

Simmo.


--------------------------------------------------------------------------------
You do not have the required permissions to view the files attached to this post.
Hookers are like bowling balls, You pick them up, put your fingers in them, then throw them in the gutter and they come back for more.
Posts: 40
Joined: Wed Oct 20, 2004 6:02 am
Location: Norway

Post by ShuDuck »

I installed a aluplate under my tank after the rusty stock plate got ripped off.

not good pics but you get the idea, one is to show how I munted it, I bent some flat steel under the tank and monted them using the stock mounts for the tank. the aluplate is bolted to the flatsteel

ed:cant get picky to work
You do not have the required permissions to view the files attached to this post.
413TT
413K
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Post by christover1 »

I fitted a nissan 260C tank = 60litres into rear of tub.
possibly not relevant to hard tops etc.
there is many floor/boot mounted tanks in the wreckers, easy to bolt to a zook floor.
lwb made it easier, this tank may or may not fit a swb, but theres many different shaped tanks.
It cost me $40 and is much cleaner inside than my zook tank was, solving all my carb issues.

christover
You do not have the required permissions to view the files attached to this post.
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Posts: 383
Joined: Fri Jul 15, 2005 7:35 pm
Location: Melbourne Victoria

Post by 84ZOOKSTA »

i will look around for a new tank and try to mount it in the standard spot, since i have a 75mm body lift i will try to rise it then a nice sheet of armour to help stop these dints from re occuring.

Anyone have a spare tank for a 84 sierra N/T.

Cheers
Simmo.
Hookers are like bowling balls, You pick them up, put your fingers in them, then throw them in the gutter and they come back for more.
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Post by christover1 »

84ZOOKSTA wrote:i will look around for a new tank and try to mount it in the standard spot, since i have a 75mm body lift i will try to rise it then a nice sheet of armour to help stop these dints from re occuring.

Anyone have a spare tank for a 84 sierra N/T.

Cheers
Simmo.
great idea, seen it done, only prob is the filler neck, means you can't just lift it up, needs moving over, or similar, sometimes meaning exhaust mod...certainly worth doing for many reasons.
You need a decent gap between tank and armour, or armour will damage tank anyway.

Some of our members have used vitara tanks, because of there flatter mounting system, and bolted them thru the floor, with a false floor over the tank. 60 litres is great for the zook

christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Post by christover1 »

fuel cell may be an option, never rust and put crud into carby.
You do not have the required permissions to view the files attached to this post.
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Posts: 575
Joined: Sun Mar 13, 2005 9:09 pm
Location: Kingston, Tas

Post by derelict_frog »

Mine holds 27L lol, rekon i could just pop it back out when its empty?
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Post by christover1 »

derelict_frog wrote:Mine holds 27L lol, rekon i could just pop it back out when its empty?
It can be done, but most often results in splitting and leaking.
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Posts: 792
Joined: Wed Mar 24, 2004 11:54 am
Location: Brisbane

Post by Pinball »

Try fitting an aftermarket...

i got a long ranger under mine, bigger capacity, heavier duty steel to take the knocks and no loss of clearance.

Spock
www.pointnshoot.org
Suzuki Auto Spares Springwood
Century Batteries
Sylverkey
Extreme Coatings
Control Synergy
Post Reply

Who is online

Users browsing this forum: No registered users and 77 guests