Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

suspention lifts

Tech talk for GMH/Isuzu and Great Wall owners

Moderator: Moderators

Forum rules
Post Reply
Posts: 43
Joined: Thu Jul 21, 2005 6:33 pm
Location: Morayfield brisbane

suspention lifts

Post by Unit »

just wonderin what is better the EFS gear the TMJ gear or the OME stuff just so you no i got a 94 jack otherwise pretty stock
Top
Posts: 1279
Joined: Wed Jul 28, 2004 9:49 pm
Location: IN THE SHED

Post by GOT MUD »

hey i ll let mudtrooper know that you have ask this q he has a similar jack to yours and has had a few different set ups in it hes on holidays at the moment :roll: should be back tommorrow i think
PUT YOUR HANDS UP IF YOU WANT TO GO FASTER
RTD Racing
OFFROAD CARTEL
Top
Posts: 62
Joined: Sun Aug 21, 2005 6:56 pm

Post by dogoff »

I HAVE A 94 TD JACK LWB
IN MINE I HAVE RIDE PRO SHOCKS ALL ROUND, RIDE PRO FRT TORSION BARS AND EXTRA H/D KINGS SPRINGS IN THE BACK.
IN THE FUTURE I WILL PUT POLY AIRS IN THE REAR ASWELL, MAINLY FOR WHEN WE GO AWAY
NOT SURE WHERE YOU LIVE, BUT I GOT ALL MY STUFF FROM OFF ROAD EQUIPMENT IN MYAREE IN PERTH
Top
Posts: 593
Joined: Sat Nov 09, 2002 8:06 pm
Location: Traralgon Vic Aust.

Post by DAZZ »

I'm using EFS shockers and custom coils (Kings) and std front bars in my 03 Jack. As for whats best, its horses for courses. You will be told many different stories as to whats best. But I think they all will do the job.
09 Cruiser Tray ARB Bull Bar/side bars, dual batts, 3" Superiour lift, MTZs, other stuff. More to come!!!
90 Sierra Soft top, 3" body 2" spring lift, 31" Claws, 5.14 Calmini, more to do.
Top
Posts: 62
Joined: Sun Aug 21, 2005 6:56 pm

Post by dogoff »

Standard torsion bars are not designed to be wound up to lift the front end they can and do snap, normally in the worst places ie in the bush.
All the main non gen suspension products are good if you do what they are designed for.
Top
Posts: 593
Joined: Sat Nov 09, 2002 8:06 pm
Location: Traralgon Vic Aust.

Post by DAZZ »

The replacement front bars listed for my Jack were not as heavy as the originals. These were alot softer on the road too. The torsion bars in the later '03 Jacks as well as the rear coils are heavier duty then the earlier widetracks. Rear coils are longer too. It's a bit of a let down when I fitted the new 2" lift coils to find it dropped by 10mm. I sent the original rear coils and T\bars to EFS for them to test spring rates and found they were heavier then the replacements.
My Jack is a 12\03 model one of the last 3 brought into Aust before they were discontinued. This info may not be of any help to you guys as yours are different models to mine. But it does explain why I have kept the original T\bars.
09 Cruiser Tray ARB Bull Bar/side bars, dual batts, 3" Superiour lift, MTZs, other stuff. More to come!!!
90 Sierra Soft top, 3" body 2" spring lift, 31" Claws, 5.14 Calmini, more to do.
Top
Posts: 43
Joined: Thu Jul 21, 2005 6:33 pm
Location: Morayfield brisbane

Post by Unit »

Thanks for your tips guys i decided to mix it up a bit i went with the EFS shocks, the PRO COMP torsion bars and the LOVELLS springs in the arse it seems to be ridin alright. i took it out on the weekend and i am very happy with the result thanks again for your feedback
Top
Post Reply

Return to “Dmax / Isuzu / Holden / Great Wall”

Who is online

Users browsing this forum: No registered users and 12 guests