Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

*HELP NEEDED* Separating un-broken axles and CV's

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 130
Joined: Wed Nov 10, 2004 1:40 pm
Location: Ipswich, QLD

*HELP NEEDED* Separating un-broken axles and CV's

Post by SilverGQ »

Need a bit of help...

Have just bought myself some heat treated haultech CV's to replace my unbroken but flogged out CV's and cant seem to get the CV and Axel to separate.

When i have changed CV's in the past they have always been broken and separate easily (due to them being in pieces) but these ones are still together and wont let go.

Thanks in advance
Jason.
GQ Shorty 4" susp, 2" bod, TD42T, 3" zaust, 35 Radial Claws/36 IROKS, Lockers, BARKODE barwork
Top
User avatar
Tiny
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Contact:
Contact Tiny

Post by Tiny »

take the c slip out then put the axle in a vice or get some one to hold the axle while you beat the crap out of it with a soft hammer
If the above post did not offend you in any way please PM me so I can try harder!!
Top
Posts: 130
Joined: Wed Nov 10, 2004 1:40 pm
Location: Ipswich, QLD

Post by SilverGQ »

how do you get to the c clip? it in behind the bearing cage in the cv? i cant see any possible way of getting in there.
GQ Shorty 4" susp, 2" bod, TD42T, 3" zaust, 35 Radial Claws/36 IROKS, Lockers, BARKODE barwork
Top
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

Buy some axles if you can find them and keep the others for spares.

LudaCris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Top
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

hold axel in hand CV down ... BFH and hit ... won't take much to come off
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Top
Posts: 3189
Joined: Thu Mar 04, 2004 1:11 pm
Location: Jimboomba

Re: *HELP NEEDED* Separating un-broken axles and CV's

Post by BIG GQ »

SilverGQ wrote:Have just bought some heat treated haultech CV's to give to Linc to replace the one he lent me.
:finger: :finger: :D
Cheers
Linc

[quote="chimpboy"]Punctuation is the difference between 'I helped my Uncle Jack off his horse' and 'I helped my uncle jack off his horse.'[/quote]
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Re: *HELP NEEDED* Separating un-broken axles and CV's

Post by RUFF »

SilverGQ wrote:Need a bit of help...

Have just bought myself some heat treated haultech CV's to replace my unbroken but flogged out CV's and cant seem to get the CV and Axel to separate.

When i have changed CV's in the past they have always been broken and separate easily (due to them being in pieces) but these ones are still together and wont let go.

Thanks in advance
Jason.
Jason if you want to call out to work we do have some new inner axles as well. $75 each.

They can be a real pain in the ass to get out.
Top
Posts: 1897
Joined: Thu Aug 05, 2004 6:24 am
Location: of the best barwork is at www.bolsys.com.au

Post by 80lsy gq »

i will ring him and see if he wants them tony...he is working today...
www.bolsys.com.au

the original and the best
Top
Posts: 42
Joined: Wed Apr 20, 2005 9:21 pm

Post by nalucas »

When we installed some new CV's, we removed the old ones (not broken) by getting a piece of pipe of appropriate length and size (big enough to take the inner axle with a snug fit (40mm should be good)) and mounting it vertically in the vice. You then stand on the bench above the vice, stick the inner axle into the tube (CV at the top) and then bang the cv hard on the top of the pipe. The momentum built up in the axle should be enough to break it free from the CV. It may take a few hits though.

Some of the hard core guys reckon that you can do it on one of the cross tubes in your chassis rail, good for trail repairs.

We had to replace the little c-clips on the end of the axle too.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 5 guests