Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Cut down Doors

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Cut down Doors

Post by bigsteve »

My Doors are almost finished, just need some paint and all is sweet.

Big Steve
yeshemesh
Top
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

Looking good man. Is that cap pop riveted on there? what material did you use? What about the latch/lock mechanism, is it still in there? Do you just use the handle inside to open it?

Cmawwnn!!! :D
Top
Posts: 293
Joined: Wed Oct 23, 2002 9:10 am

Post by skippy »

looking niiiiiiiiiiiiiiiiiice
Skippy


--------------------------------------------------
for all things digital, come to NEWflavour
'a better tasting multimedia experience'

http://www.newflavour.com/
--------------------------------------------------
Top
User avatar
stu
Posts: 913
Joined: Wed Jan 22, 2003 8:08 am
Location: brisbane

Post by stu »

anythink tricky or did you just hack into them with a grinder (after removing the glass and stuff)
i don't need no stinking quote for my sig. line!
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

nice Steve. I'll have to get some of the capping done too. Can you let me know where and how much to get them done as mine are a tad half arsed
Ransom note = demand + collage
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

nice :D
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

Damo wrote:Looking good man. Is that cap pop riveted on there? what material did you use? What about the latch/lock mechanism, is it still in there? Do you just use the handle inside to open it?

Cmawwnn!!! :D


I used 1.5 mm C channel 75mm wide and 25mm high.

The door lock for the inside handle links to a lever on top of the mechanism, I just cut a square outta the C Channel so that lever protrudes you flick it forwat=rds and the door opens.
yeshemesh
Top
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

Poser shot with doors painted:
yeshemesh
Top
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

Damn i like hardtops... :D
Top
Posts: 293
Joined: Wed Oct 23, 2002 9:10 am

Post by skippy »

uh-oh...damo's getting ideas again :finger: :D
Skippy


--------------------------------------------------
for all things digital, come to NEWflavour
'a better tasting multimedia experience'

http://www.newflavour.com/
--------------------------------------------------
Top
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

skippy wrote:uh-oh...damo's getting ideas again :finger: :D


No way man, got enough on my plate at the moment :roll:

bigsteve, have you done anything with the door trims yet :?:
Top
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

Damo wrote:
skippy wrote:uh-oh...damo's getting ideas again :finger: :D


No way man, got enough on my plate at the moment :roll:

bigsteve, have you done anything with the door trims yet :?:


The doors didn't come with trims so I cut the right shapes out of stainless, and sprayed the whole lot black.

I have a pic of the insides and the door mechanism somewhere, will post em when I can find em.
yeshemesh
Top
Posts: 3825
Joined: Wed Nov 06, 2002 8:42 pm
Location: in the sky , its a bird , its a plane ! No its super MOOSE !!!

Post by moose »

did mine at work the other day !!!!!!!
no swearing or cussing !!!!!!!

I LOVE THE PLASMA CUTTER !!!!!!!! :finger: :D

doing the same as you steve , run the lever straight off the top of the latch !!!!!!

Im going ally checkerplate , top cover , & possibly trims !!!!!

dont know wether I wanna cut up me original trims !!!! :?
MissForbyNoob wrote:
and one day i'll just become a worthless housewife.
Top
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

Pics of door mechanism
yeshemesh
Top
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

Sorry, should have "Added", not "Edited"

Door mechanism shot above.

Steve
yeshemesh
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

moose wrote:Im going ally checkerplate , top cover , & possibly trims !!!!!

dont know wether I wanna cut up me original trims !!!! :?


Is that cos they are the only strait bit of the Zuk left ??? :D
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 3825
Joined: Wed Nov 06, 2002 8:42 pm
Location: in the sky , its a bird , its a plane ! No its super MOOSE !!!

Post by moose »

be nice , it has a very nice bright yello screen frame & roof !!!!! :D
MissForbyNoob wrote:
and one day i'll just become a worthless housewife.
Top
Posts: 2066
Joined: Mon Jun 09, 2003 8:17 pm
Location: Gympie

Post by Rhett »

Instead of useing the inside handle I moved the outside handle down below the lock and modifyed the bit of rod that connects them. Works like a charm. Did you have trouble with your door bein a bit flimsy after being cut? Thinken of fillen mine with space invader.
Its a wheelbase thing
Top
Posts: 2066
Joined: Mon Jun 09, 2003 8:17 pm
Location: Gympie

Post by Rhett »

moose wrote:did mine at work the other day !!!!!!!
no swearing or cussing !!!!!!!

I LOVE THE PLASMA CUTTER !!!!!!!! :finger: :D

doing the same as you steve , run the lever straight off the top of the latch !!!!!!

Im going ally checkerplate , top cover , & possibly trims !!!!!

dont know wether I wanna cut up me original trims !!!! :?


I thought of usen checker plate but I rekend it would be a bit rough on the arm in comps. Then agin that could b me driven.
Its a wheelbase thing
Top
Posts: 11
Joined: Fri Jul 18, 2003 11:14 pm
Location: Darwin

Post by Nook »

Rhett. any chance of some closer pics....

Cheers
Top
Posts: 2066
Joined: Mon Jun 09, 2003 8:17 pm
Location: Gympie

Post by Rhett »

Il See if I can get a pic of the inside Nook. It could be a while I don't have a digital camera and Im not taking a whole film of my bodgy workmanship.
Its a wheelbase thing
Top
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

Rhett wrote: Did you have trouble with your door bein a bit flimsy after being cut?


The doors a flimsy from the factory, the only support is wedged into the buttom and glued to the skin, I pop rivited it to the skin to tension it.
yeshemesh
Top
Posts: 11
Joined: Fri Jul 18, 2003 11:14 pm
Location: Darwin

Post by Nook »

Links to my Ally doors.... would prefer fibreglass like shorty 40 style from FRP....

http://img.villagephotos.com/p/2003-7/304083/Picture011.jpg

http://img.villagephotos.com/p/2003-7/304083/Picture008.jpg

Cheers
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 66 guests