Hi all,
I'm currently running 31' MT/Rs. They had been lasting really well and were a great tyre (other than in mud) but the 2 front tyres are now rooted.
I'm not sure what has happened but one row of the middle lugs has lifted at one edge, creating an un-even tyre surface (the lug has lifted about 3-4mm higher than the surrounding lugs when sited across the tread of the tyre.
It makes the car shake like anything on the highway.
Just wondering if anyone would know what could cause this type of problem? I have had the car in to Rangie Auto late last year who said the front end was all well aligned, but through corners it still sounds like the tyres aren't aligned properly.
Thanks,
Luke
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Strange tyre problem
Moderator: Micka
Strange tyre problem
'88 Rangie, 3.9i, Bilstein Shocks and RS Springs, ARB Lockers F&R, 24spline rear axles, Flares, [url=http://users.on.net/~vethaak/Projects.htm]Custom centre console and cargo shelves[/url]
The tyres are Goodyear MT/Rs. They are about 2 years old with ~40000k's on em.
It is hard to get a good picture, but you may be able to see what I am talking about from these (sorry there a bit big):
It is hard to get a good picture, but you may be able to see what I am talking about from these (sorry there a bit big):
'88 Rangie, 3.9i, Bilstein Shocks and RS Springs, ARB Lockers F&R, 24spline rear axles, Flares, [url=http://users.on.net/~vethaak/Projects.htm]Custom centre console and cargo shelves[/url]
You need to regulary rotate your tyres front to back to reduce scalloping.
If you reverse the direction you can even out some of the uneven wear.
I would say that your alignment is not all that good also. It should be 0-2mm toe out. A wheel balance could help reduce the shaking also.
Cheers
John D - Disco 200 Tdi
If you reverse the direction you can even out some of the uneven wear.
I would say that your alignment is not all that good also. It should be 0-2mm toe out. A wheel balance could help reduce the shaking also.
Cheers
John D - Disco 200 Tdi
John D
Defender 110 2.4
Defender 110 2.4
Hi Luke,
Had a very similar prob with mine, but the tyre wear was on the outside of the tread, both fronts, some on the rears. Very similar to yours otherwise. Centre diff is locked, warning light might not be on.
A friend's kid played with all the buttons and dials in mine, did notice some slight vibration during the time I drove it (on bitumen) for 500+kms.
It was only when I took it for an alignment that the cause of the tyre wear problem was identified, centre diff locked. Check it out.
I only joined this forum to tell you this.
cheers, DL
Had a very similar prob with mine, but the tyre wear was on the outside of the tread, both fronts, some on the rears. Very similar to yours otherwise. Centre diff is locked, warning light might not be on.
A friend's kid played with all the buttons and dials in mine, did notice some slight vibration during the time I drove it (on bitumen) for 500+kms.
It was only when I took it for an alignment that the cause of the tyre wear problem was identified, centre diff locked. Check it out.
I only joined this forum to tell you this.
cheers, DL
Had some similar wear patterns on the front tyres of a Vogue SE witha siezed viscous coupling, same symptom as engaged difflock.
DL has nailed it me thinks.
PS, this RR had driven around the greater hobart district for 3 years like this apparently, the owner being told that the squealing when cornering in carparks was 'normal'! A front swivel overhaul on both sides, a new viscous unit, and reset of all the ABS codes fixed the thing perfectly.
DL, Was it you who E mailed me the other day about this? Spookily, I only saw the E mails this morning.....
JC
DL has nailed it me thinks.
PS, this RR had driven around the greater hobart district for 3 years like this apparently, the owner being told that the squealing when cornering in carparks was 'normal'! A front swivel overhaul on both sides, a new viscous unit, and reset of all the ABS codes fixed the thing perfectly.
DL, Was it you who E mailed me the other day about this? Spookily, I only saw the E mails this morning.....
JC
'92 Rangie Sherwood/turbo intercooled isuzu4BD1 /ACE/ full leather/2.5" exh/2.5" body lift/DeCarbon shocks/LR tanks/LT95 back in and OK now, Sals conversion soon...
Who is online
Users browsing this forum: No registered users and 2 guests