Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Strange tyre problem

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 48
Joined: Mon Aug 30, 2004 11:44 am
Location: Melbourne

Strange tyre problem

Post by LukeV »

Hi all,

I'm currently running 31' MT/Rs. They had been lasting really well and were a great tyre (other than in mud) but the 2 front tyres are now rooted.
I'm not sure what has happened but one row of the middle lugs has lifted at one edge, creating an un-even tyre surface (the lug has lifted about 3-4mm higher than the surrounding lugs when sited across the tread of the tyre.
It makes the car shake like anything on the highway.

Just wondering if anyone would know what could cause this type of problem? I have had the car in to Rangie Auto late last year who said the front end was all well aligned, but through corners it still sounds like the tyres aren't aligned properly.

Thanks,

Luke
'88 Rangie, 3.9i, Bilstein Shocks and RS Springs, ARB Lockers F&R, 24spline rear axles, Flares, [url=http://users.on.net/~vethaak/Projects.htm]Custom centre console and cargo shelves[/url]
Posts: 918
Joined: Fri Jul 22, 2005 12:49 pm
Location: canberra

Post by 460cixy »

any chance of some pics? what brand? retreads?
range rover & series one landy!
Posts: 48
Joined: Mon Aug 30, 2004 11:44 am
Location: Melbourne

Post by LukeV »

The tyres are Goodyear MT/Rs. They are about 2 years old with ~40000k's on em.
It is hard to get a good picture, but you may be able to see what I am talking about from these (sorry there a bit big):

Image
Image
Image
'88 Rangie, 3.9i, Bilstein Shocks and RS Springs, ARB Lockers F&R, 24spline rear axles, Flares, [url=http://users.on.net/~vethaak/Projects.htm]Custom centre console and cargo shelves[/url]
Posts: 41
Joined: Fri Oct 10, 2003 10:45 am
Location: Melbourne

Post by disco200tdi »

You need to regulary rotate your tyres front to back to reduce scalloping.
If you reverse the direction you can even out some of the uneven wear.

I would say that your alignment is not all that good also. It should be 0-2mm toe out. A wheel balance could help reduce the shaking also.


Cheers

John D - Disco 200 Tdi
John D

Defender 110 2.4
DL
Posts: 299
Joined: Wed May 31, 2006 8:33 pm
Location: Bellarine, Brackistan

Post by DL »

Hi Luke,

Had a very similar prob with mine, but the tyre wear was on the outside of the tread, both fronts, some on the rears. Very similar to yours otherwise. Centre diff is locked, warning light might not be on.

A friend's kid played with all the buttons and dials in mine, did notice some slight vibration during the time I drove it (on bitumen) for 500+kms.

It was only when I took it for an alignment that the cause of the tyre wear problem was identified, centre diff locked. Check it out.

I only joined this forum to tell you this.

cheers, DL
Posts: 918
Joined: Fri Jul 22, 2005 12:49 pm
Location: canberra

Post by 460cixy »

500k with the center diff locked and nothing broke?
range rover & series one landy!
DL
Posts: 299
Joined: Wed May 31, 2006 8:33 pm
Location: Bellarine, Brackistan

Post by DL »

Would have been even more. Included return trip from Geelong to Grampians. Only symptom was slight vibration. Mechanic couldn't believe nothing broke either.

DL
Posts: 463
Joined: Sun Nov 21, 2004 10:15 pm
Location: Kingston,Hobart, Tasmania

Post by justinC »

Had some similar wear patterns on the front tyres of a Vogue SE witha siezed viscous coupling, same symptom as engaged difflock.

DL has nailed it me thinks.

PS, this RR had driven around the greater hobart district for 3 years like this apparently, the owner being told that the squealing when cornering in carparks was 'normal'! A front swivel overhaul on both sides, a new viscous unit, and reset of all the ABS codes fixed the thing perfectly.

DL, Was it you who E mailed me the other day about this? Spookily, I only saw the E mails this morning.....

JC
'92 Rangie Sherwood/turbo intercooled isuzu4BD1 /ACE/ full leather/2.5" exh/2.5" body lift/DeCarbon shocks/LR tanks/LT95 back in and OK now, Sals conversion soon...
Post Reply

Who is online

Users browsing this forum: No registered users and 28 guests