Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Freight and bullbars/parts

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 502
Joined: Thu Dec 01, 2005 12:09 pm
Location: Cairns

Freight and bullbars/parts

Post by fnqcairns »

I am after advice or recommendation's on how a person can get secondhand bullbars across the country or anything large for a 4wd without it costing so much it becomes a silly idea?

cheers fnq
*JUST LUV IT* 96 GQ LWB TD4.2, Cav, Kings, Dobinsons, Motorguard, Enginesaver, 400 pro, Cooper ST's (rolls eyes), fleetguard oil filters, Delo 400 engine oil, Delo ESI gearbox oil and an RTC.
Top
Posts: 564
Joined: Wed Apr 19, 2006 4:55 pm
Location: Brisbane

Contact:
Contact Potter

Post by Potter »

X3

barnsey ive seen the same thing all the tyres and good stuff is in melb :bad-words:
Top
Posts: 111
Joined: Sun Jan 22, 2006 3:52 pm
Location: canberra

Post by Bunyip »

xxxxx4444444

nothing at all is anywhere near canberra ( besides snow!!!!!!)
mad mk patrol go hard or go home
Top
Posts: 1781
Joined: Mon May 17, 2004 10:01 pm
Location: Geelong

Post by beretta »

You need to ring around and get some prices, I got a set of swampers sent from Melbourne to Sydney for $90 on a pallet, it was one pallet space on a Bdouble and just so happened they were trying to fill the load and being an ex trucky I knew a thing or two about them trying to fill loads. But rining around a few carriers is the best way. The bain of transport operations is backloading, so you've gotta think outside the square a little, try talking to removalists that might cover certain areas as they often run home empty etc and will carry stuff very cheap to pay for the fuel.

hope that helps a bit. Paul
Top
Posts: 960
Joined: Mon Feb 23, 2004 10:57 am

Post by Ryano »

We've got a fairly good freight rate with Ipec. I can organise the freight for anyone that wants it.
Here is a rough idea on costs - $80 for 4 36"tyres from Brissie to Sydney.

Cheers,
Ryano
Hi!
Top
Posts: 502
Joined: Thu Dec 01, 2005 12:09 pm
Location: Cairns

Post by fnqcairns »

I found out a person can get a passable deal if they waste $20 on long distance phone calls :cry: .
The best deal I could get as a private person (some wouldn't even bother because of no ABN) was $450 then up popped a $280 quote so I got there in the end.
Ryano can you get freight from anywhere to anywhere at a fair price or just from Bris? The deal you got on those tyres is mighty good!!!

cheers fnq
*JUST LUV IT* 96 GQ LWB TD4.2, Cav, Kings, Dobinsons, Motorguard, Enginesaver, 400 pro, Cooper ST's (rolls eyes), fleetguard oil filters, Delo 400 engine oil, Delo ESI gearbox oil and an RTC.
Top
Posts: 960
Joined: Mon Feb 23, 2004 10:57 am

Post by Ryano »

Reasonable rate anywhere in OZ.
PM some dimensions, weight and where to and from and I'll get a quote.

Cheers,
Ryano
Hi!
Top
Posts: 502
Joined: Thu Dec 01, 2005 12:09 pm
Location: Cairns

Post by fnqcairns »

PM sent :cool:
*JUST LUV IT* 96 GQ LWB TD4.2, Cav, Kings, Dobinsons, Motorguard, Enginesaver, 400 pro, Cooper ST's (rolls eyes), fleetguard oil filters, Delo 400 engine oil, Delo ESI gearbox oil and an RTC.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 143 guests