Hi
I have been searching the site and think I have it sorted but want to check a few things .
Firstly I do not have a pajero but looking at repowering an offroader with a mitsi engine . So a gearbox that had a 2.5 diesel (mid 80's) will take a 2.6 petrol or a 2.0 petrol like a 4g63 ( 2.0 dohc turbo ) .
Also if I was lucky enough to find a pto they bolt to the t/case . Anyone have any pic's or info on this ? If I got low t/case gears ( looks like 2.85's are about ) would this mess with the pto ?
Lastly these mostly have 4.875 diff ratios but some could have 5.29's .
CHeers
Chris
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
pajero engine swaps and t/case info
Moderator: -Scott-
Re: pajero engine swaps and t/case info
I couldn't guarantee it. I'm fairly certain the 2.6 manual and 2.5 would be interchangeable, but:Rotazuk wrote:Hi
I have been searching the site and think I have it sorted but want to check a few things .
Firstly I do not have a pajero but looking at repowering an offroader with a mitsi engine . So a gearbox that had a 2.5 diesel (mid 80's) will take a 2.6 petrol or a 2.0 petrol like a 4g63 ( 2.0 dohc turbo ) .
- the 4G63 is a different engine series
2.0 Astron manual gearboxes have different bolt pattern to the 2.6 Astron manual.
Bitsamissin is the expert, but I believe the 2.85s won't work with factory PTOs.Rotazuk wrote:Also if I was lucky enough to find a pto they bolt to the t/case . Anyone have any pic's or info on this ? If I got low t/case gears ( looks like 2.85's are about ) would this mess with the pto ?
Yes.Rotazuk wrote:Lastly these mostly have 4.875 diff ratios but some could have 5.29's .
CHeers
Chris
Cheers,
Scott
Who is online
Users browsing this forum: No registered users and 0 guests