Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

pajero engine swaps and t/case info

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 264
Joined: Tue Aug 31, 2004 4:57 pm
Location: New Zealand

pajero engine swaps and t/case info

Post by Rotazuk »

Hi
I have been searching the site and think I have it sorted but want to check a few things .

Firstly I do not have a pajero but looking at repowering an offroader with a mitsi engine . So a gearbox that had a 2.5 diesel (mid 80's) will take a 2.6 petrol or a 2.0 petrol like a 4g63 ( 2.0 dohc turbo ) .

Also if I was lucky enough to find a pto they bolt to the t/case . Anyone have any pic's or info on this ? If I got low t/case gears ( looks like 2.85's are about ) would this mess with the pto ?

Lastly these mostly have 4.875 diff ratios but some could have 5.29's .

CHeers

Chris
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Re: pajero engine swaps and t/case info

Post by -Scott- »

Rotazuk wrote:Hi
I have been searching the site and think I have it sorted but want to check a few things .

Firstly I do not have a pajero but looking at repowering an offroader with a mitsi engine . So a gearbox that had a 2.5 diesel (mid 80's) will take a 2.6 petrol or a 2.0 petrol like a 4g63 ( 2.0 dohc turbo ) .
I couldn't guarantee it. I'm fairly certain the 2.6 manual and 2.5 would be interchangeable, but:
  • the 4G63 is a different engine series

    2.0 Astron manual gearboxes have different bolt pattern to the 2.6 Astron manual.
Rotazuk wrote:Also if I was lucky enough to find a pto they bolt to the t/case . Anyone have any pic's or info on this ? If I got low t/case gears ( looks like 2.85's are about ) would this mess with the pto ?
Bitsamissin is the expert, but I believe the 2.85s won't work with factory PTOs.
Rotazuk wrote:Lastly these mostly have 4.875 diff ratios but some could have 5.29's .

CHeers

Chris
Yes.

Cheers,

Scott
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests