Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

moving front diff forward

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 675
Joined: Sat Dec 17, 2005 10:06 pm
Location: campbelltown

moving front diff forward

Post by Nat84 »

well i have to do anythink to the steering or any other mobs if i move the diff forward 30mm??
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: moving front diff forward

Post by bogged »

Nat84 wrote:well i have to do anythink to the steering or any other mobs if i move the diff forward 30mm??
probably..
but why so much? most GQs etc move 12mm to clear 35's...
Top
Posts: 675
Joined: Sat Dec 17, 2005 10:06 pm
Location: campbelltown

Post by Nat84 »

Be coz I need just enouth room to fit the 33’ and I think 30mm will do it with now mods I hop
So while I do the front hubs I will do the springs at the same time
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set
Top
Posts: 1170
Joined: Tue Jun 01, 2004 4:27 pm
Location: Goodna, Queensland

Post by Bartso »

i too am looking at moving my front diff forward in my GQ the things i can see being affected is your parnhard rod and steering arm the question is how far can the diff be moved forward befor it affects these things

also maybe in your case you will to look at your shocks and springs
MUD BEERS & MAYHEM 4x4 & SOCIAL Group
[url=http://www.fourbys.com.au/]Fourby's tyre and mechanical[/url]
[url=http://www.4wdmonthly.com.au/forum/showthread.php?t=24441/]My build up for ttc[/url]
Top
Posts: 675
Joined: Sat Dec 17, 2005 10:06 pm
Location: campbelltown

Post by Nat84 »

well iam thinking if i don't move it mybe some extened shackels
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set
Top
User avatar
DamTriton
God of Athiests
Posts: 8336
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Post by DamTriton »

well i have to do anythink to the steering or any other mobs if i move the diff forward 30mm??

_________________
1993 ford Raider 2" lift, 2" bodylift, 33x12.5

If you're talking IFS it wouldn't be worth the hassle.

Upper & lower wishbones, diff mounting, and steering, and suspension would all have to be moved
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Top
Posts: 675
Joined: Sat Dec 17, 2005 10:06 pm
Location: campbelltown

Post by Nat84 »

DAMKIA wrote:well i have to do anythink to the steering or any other mobs if i move the diff forward 30mm??

_________________
1993 ford Raider 2" lift, 2" bodylift, 33x12.5

If you're talking IFS it wouldn't be worth the hassle.

Upper & lower wishbones, diff mounting, and steering, and suspension would all have to be moved

Hilux solid axel
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Nat84 wrote:Hilux solid axel
should have kept the hilux wrapped around the solid axle... >flame suit on<
Top
Posts: 675
Joined: Sat Dec 17, 2005 10:06 pm
Location: campbelltown

Post by Nat84 »

bogged wrote:
Nat84 wrote:Hilux solid axel
should have kept the hilux wrapped around the solid axle... >flame suit on<
Hilux solid axle is on a hilux
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Nat84 wrote:
bogged wrote:
Nat84 wrote:Hilux solid axel
should have kept the hilux wrapped around the solid axle... >flame suit on<
Hilux solid axle is on a hilux
so this isnt going on with the car in your sig?

telling people what car you are actually working on may get you some answers... thats why Gary highlighted in yellow the raider bit.... :roll:
Top
Posts: 675
Joined: Sat Dec 17, 2005 10:06 pm
Location: campbelltown

Post by Nat84 »

bogged wrote:
Nat84 wrote:
bogged wrote:
Nat84 wrote:Hilux solid axel
should have kept the hilux wrapped around the solid axle... >flame suit on<
Hilux solid axle is on a hilux
so this isnt going on with the car in your sig?

telling people what car you are actually working on may get you some answers... thats why Gary highlighted in yellow the raider bit.... :roll:
i think it may help a bit :oops:

i wish it was going on the car in my sig

i'am working on 85 hilux and wondering with the diff moved forward 30mm if i have to do anythink for the steering or will it be ok
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set
Top
Posts: 3349
Joined: Tue Nov 23, 2004 10:29 am
Location: Not where you are

Contact:
Contact Gribble

Post by Gribble »

You will need to shorted the torque rod and steering arm. Other than that everything else should be fine.
\m/
Top
Posts: 675
Joined: Sat Dec 17, 2005 10:06 pm
Location: campbelltown

Post by Nat84 »

Gribble wrote:You will need to shorted the torque rod and steering arm. Other than that everything else should be fine.
who would i take it to to be done? in NSW
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set
Top
Posts: 535
Joined: Sat Feb 05, 2005 9:57 am
Location: Oakleigh, Victoria

Post by of4x4 »

Bartso wrote:i too am looking at moving my front diff forward in my GQ the things i can see being affected is your parnhard rod and steering arm the question is how far can the diff be moved forward befor it affects these things....
Bartso,

The distance was discussed recently in the Nissan Area. 12mm seems to be the general consensus. 15mm causes panhard issues.

http://www.outerlimits4x4.com/PHP_Modul ... hp?t=81384
Top
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

Contact:
Contact DR Frankenstine

hilux

Post by DR Frankenstine »

Hilux allready has a second hole 35mm rearward on the drivers side (I think) just drill a hole in the other perch the same and move the diff forward No problems with anything except having to shorten the top arm.
Remember some days your the pigeon and other days your the statue
Top
Posts: 675
Joined: Sat Dec 17, 2005 10:06 pm
Location: campbelltown

Re: hilux

Post by Nat84 »

DR Frankenstine wrote:Hilux allready has a second hole 35mm rearward on the drivers side (I think) just drill a hole in the other perch the same and move the diff forward No problems with anything except having to shorten the top arm.
what about the steering??
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set
Top
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

Contact:
Contact DR Frankenstine

Re: hilux

Post by DR Frankenstine »

Nat84 wrote:
DR Frankenstine wrote:Hilux allready has a second hole 35mm rearward on the drivers side (I think) just drill a hole in the other perch the same and move the diff forward No problems with anything except having to shorten the top arm.
what about the steering??
can't remember if we lengthened the steering arm as well (I don't think so) I think the box copes with it. Might have to re-align the steering wheel though.
Remember some days your the pigeon and other days your the statue
Top
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

Contact:
Contact DR Frankenstine

hilux

Post by DR Frankenstine »

OH and a tailshaft spacer :oops: :oops:
Remember some days your the pigeon and other days your the statue
Top
Posts: 88
Joined: Tue May 23, 2006 7:44 pm
Location: brisbane

Post by eye-for-detail »

14.5mm drill
drill perches 33mm rearward
get adjustable torque rod
or use rear springs in front
LN106 d/cab, 2in lift, 32s, airlocker,
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 31 guests