Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

changing seal behind swivel hub?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 150
Joined: Wed Mar 10, 2004 7:02 am
Location: Newcastle

changing seal behind swivel hub?

Post by CB0569 »

How hard is it to change the seal behind the swivel hub?
Mine is leaking so where do i get some from (eg Repco,EBAY etc)?
Top
User avatar
Tiny
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Contact:
Contact Tiny

Post by Tiny »

pretty easy, best to get a whole swivel hub kit and do the axle seals etc while your in there.
If the above post did not offend you in any way please PM me so I can try harder!!
Top
Posts: 194
Joined: Mon Mar 29, 2004 7:03 pm
Location: NOW IN TOWNSVILE

Post by skippy's GQ »

its not too hard just time consuming, when u do it just lay it out in the order you pulled it apart so u dont get stuck when putting it all together again, just make sure you get the wheel bearing nut set right.

can get seal from most auto parts stores or from a dealer, sounds like its the INNER AXLE SEAL coast about $5 to $10


SKIPPY
88 GQ SWB 5''SUS LIFT 60MM BODY LIFT, FRONT LOKKA, NOW WITH 304, ...... :D

www.roverpark.com
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: changing seal behind swivel hub?

Post by bogged »

as said, not a bad job, take the time to grease the CV, and wheel bearings etc.
Top
Posts: 117
Joined: Thu Jun 22, 2006 8:03 am
Location: MELBOURNE

Post by rochrd »

picking my GQ up tonight just got all the seals on r/h/s done.
the kit came all in one and ive got l/h/s aswell for when that starts to leak.
cost me all up $450 labour n parts.
dont know if thats cheap or not but dont have time to do myself.
Top
Posts: 1072
Joined: Thu Jun 17, 2004 4:38 pm
Location: Port Macquarie

..

Post by JemmyBubbles »

all up.. spose thats not too bad...

I have some >$500 quotes soo...
[quote="MSCHIF"]SPUA its like shaving a barbie dolls head, amusing but pointless.[/quote]
Top
Posts: 238
Joined: Fri Oct 14, 2005 4:14 pm
Location: Sydney

Post by PeowPeow »

whats the go with oil stabilisers (sp)

I was told they can help with small leaks and stuff I was hoping this would be enough to stop a minor leak in the hubs?

Cheers

ash
Top
Posts: 1931
Joined: Sun Jun 22, 2003 10:29 am
Location: Everything 4WD, 86 Camms Rd Cranbourne

Contact:
Contact GUJohnno

Post by GUJohnno »

Check the kits out here:
http://cgi.ebay.com.au/Swivel-Housing-o ... dZViewItem

Image
My club
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
Top
Posts: 3054
Joined: Mon Nov 03, 2003 4:30 pm
Location: Melbourne

Post by hottiemonster »

yep Johnno, thats the kit i put in mine, working really good so far.
Gq ute new built
Top
Posts: 80
Joined: Fri Oct 14, 2005 11:34 pm
Location: melbourne

Post by mudtrekka »

Could be your swivel housing bearings.This was the case for me,while dismantling the hub to do the swivel seal I noticed they were stuffed.
Put new bearings in and re-assembled (checking condition of the old seals first),problem fixed.
Top
Posts: 150
Joined: Wed Mar 10, 2004 7:02 am
Location: Newcastle

Post by CB0569 »

Checked for ware tonight L/H/S has movement but its the R/H/S that is leaking.
The Mav has also done 380000 kms
Top
Posts: 2775
Joined: Thu Apr 13, 2006 8:59 pm
Location: Melbourne

Post by GQ Bear »

mudtrekka wrote:Could be your swivel housing bearings.This was the case for me,while dismantling the hub to do the swivel seal I noticed they were stuffed.
Put new bearings in and re-assembled (checking condition of the old seals first),problem fixed.
they come in the kit, very good kit contains everything from swivel hub seals, bearings, cups to wheel bearing seal. Terrain Tamer brand. You can also get wheel bearing kits if you find these are f**ked. You should clean up wheel bearings, check they're condition and repack or replace whilst you've got it apart.

Be warned - sometimes you need to press the swivel hub bearings off the king pin shafts.
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Top
Posts: 48
Joined: Wed Jan 14, 2004 11:00 pm
Location: Thomastown, Vic

Post by GQPatrol V8 »

GQ Bear wrote:Be warned - sometimes you need to press the swivel hub bearings off the king pin shafts.
Yep, Did this yesterday. took quite a bit of pressure before they shifted with a loud bang in the press.
Shane.
Top
Posts: 252
Joined: Sat Jul 16, 2005 11:15 pm
Location: Newcastle, NSW

Post by Hulksta »

GQPatrol V8 wrote:
GQ Bear wrote:Be warned - sometimes you need to press the swivel hub bearings off the king pin shafts.
Yep, Did this yesterday. took quite a bit of pressure before they shifted with a loud bang in the press.
Shane.
Yep... same here!

Spend the time to shim them correctly on install too.... or you will get the dreaded patrol wheel shimmy.

Dan
THE HULKSTA.... Built by Nissan, Rebadged by Ford, Perfected by Me!
Top
Posts: 317
Joined: Fri Nov 18, 2005 9:32 pm

Post by ats4x4dotcom »

we only use factory parts for swivel rebiulds, and we use $31 a tube grease for cv's [one tube per side]

Aftermarket parts just dont last as long, seals dont quite fit the same, tapers slightly different, etc etc.

We thread lock the king pin nuts, hub bolts etc as well on re assembly.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 32 guests