Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

what lift for 36's

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 199
Joined: Thu May 04, 2006 5:18 pm

what lift for 36's

Post by vorno_18 »

i wanna fit a set or 36" tsl sx swapers to my 1999 gu how much lift do i need, i dont want it scrubbing on the streets as its a daily driver, i no i could just throw on a 7" lift but i want to go minimum lift that will fit these tryres and i dont want body lift

also will my 2.8 struggle to move them, i have 4.6 centres, im wanting to fit a v8 in the future but the old 2.8 will have to do for now
60 series cruiser, GU patrol
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

theyre bout a 35" true size arent they?
id say 3" or 4" if u want.
also depends on rim offset

cant comment on the 2.8 as i dont have one but from what ive heard they are underpowered
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 533
Joined: Sat Jan 15, 2005 4:54 pm
Location: Melbourne, Australia.

Contact:
Contact InSanE

Post by InSanE »

i have 3" coils, 2" body, 14mm radius arm spacers, and a slight guard cut and i clear 36" ET2's easy
GQ LWB TD42, boost, lockers etc

http://forum.mudrhino.com.au/viewtopic.php?t=262&start=30
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

little roly did Q78's with 2inch lift and no hacking
Top
Posts: 671
Joined: Mon Aug 23, 2004 10:06 am
Location: Mornington

Post by YankeeDave »

36 TSL's are 36.3" true

36 TSL SX are 35.9"

I'd say a 4" spring lift would fit perfect.

and i think you're 2.8L is going to struggle.
Jeep Wrangler TJ

Jeep Cherokee XJ
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

not too sure what the 35MTR measure as a true size, but we did run these on my old mans GU 2.8L it turned them quite well, on the street, thou a little slow of the line, we have since changd the diff ratio to a 4.88 and this has improved it a bit, but it is still a slow motor off the line,

also, your low range wont be that good, so id look at fittin a set of rockhoppers or marks gears, will make drivability in low a lot better,
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

InSanE wrote:i have 3" coils, 2" body, 14mm radius arm spacers, and a slight guard cut and i clear 36" ET2's easy
GU
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 1047
Joined: Sun Nov 19, 2006 2:27 pm
Location: Wollongong

re: lift 4 36's

Post by Nelso »

A mate had a GU with a 5" kit and ran 35's without touching any guards. He did have Snake arms in the front which move the diff forward an inch.
What's the difference between ignorance and apathy? I don't know and I don't care.

I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
Top
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

6 inch lift for sure. 4 inch lift and no body lift and my 36 's scrubbed. GU. The 2.8 will handle them but you will lose a bit of go as with any motor.

LudaCris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Top
Posts: 1006
Joined: Wed Jan 07, 2004 8:25 pm
Location: Strapped into the Evil!

Post by BIg StEvE »

Hahaha i got 36 pedes on with a two inch sus and two inch body! Radius arm spacers in the front clear tyres perfect. Slight rubbing on the rear guards but they have yet to be trimmed. :armsup:
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Image

Steves grenade with sagged 3in sus and Q78s - 36's.
Top
Posts: 850
Joined: Tue Jun 28, 2005 1:44 pm
Location: Sydney Southern Suburbs

Post by Swerve »

Slighty of topic, what size can I run on a GU with 2" SL. WOuld like to get some Simex 35" 10.5 to also swap with my G60.

Steve
2010 TB48 GU Patrol
1973 G60 MWB Soft Top Showcar
1972 G60 MWB Soft Top Project 4WD
1978 G60 Ute "HellPatrol"
www.oz4wdclassicparts.com.au
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Swerve wrote:Slighty of topic, what size can I run on a GU with 2" SL. WOuld like to get some Simex 35" 10.5 to also swap with my G60.

Steve
see photo above.
Top
Posts: 850
Joined: Tue Jun 28, 2005 1:44 pm
Location: Sydney Southern Suburbs

Post by Swerve »

bogged wrote:
Swerve wrote:Slighty of topic, what size can I run on a GU with 2" SL. WOuld like to get some Simex 35" 10.5 to also swap with my G60.

Steve
see photo above.
So my guess is YES they may fit ! can I use stock offset rims or would i need more ?
2010 TB48 GU Patrol
1973 G60 MWB Soft Top Showcar
1972 G60 MWB Soft Top Project 4WD
1978 G60 Ute "HellPatrol"
www.oz4wdclassicparts.com.au
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 11 guests