POST UP YOUR ROVERS

Post by **V8 Rangie** » Thu Jan 04, 2007 1:48 pm

Looking pretty good mate!

What sort of running gear has it got or planning?

Camo

Post by **schuler** » Fri Jan 05, 2007 9:03 am

V8 Rangie wrote:Looking pretty good mate!

What sort of running gear has it got or planning?

Camo

Hi, it will be running 3.9 with disco series2 inlet manifold on straight gas., it has an R380 5 speed with maxidrive lockers both ends running 4:11's.

It just needs wiring and final assembly.....

Steve

Post by **TRobbo** » Fri Jan 05, 2007 12:56 pm

I like the modification of the steering guard to hold the steering dampner. What is the brass coloured bracket bolted to the chassis for?

Post by **PSI250** » Fri Jan 05, 2007 6:45 pm

schuler wrote:Hi, it will be running 3.9 with disco series2 inlet manifold on straight gas., it has an R380 5 speed with maxidrive lockers both ends running 4:11's.

It just needs wiring and final assembly.....

Steve

don't forget to keep the pics coming when its all finished, definately looks tuff!

Post by **James Brittain** » Sat Jan 06, 2007 2:12 pm

Hi Steve,

Where did you get that steering guard from with the relocated steering damper mount?

Thats exactly what i want to do for my disco.

Is it modified, or off the shelf from somewhere?

Cheers,

James.

Post by **schuler** » Sat Jan 06, 2007 6:05 pm

TRobbo wrote:I like the modification of the steering guard to hold the steering dampner. What is the brass coloured bracket bolted to the chassis for?

Hi the brass coloured bracket is a maxi-drive bracket to relocate the damper, but i couldn't get it to line up. Bloody custom cars!!

Steve

Post by **schuler** » Sat Jan 06, 2007 6:07 pm

James Brittain wrote:Hi Steve,

Where did you get that steering guard from with the relocated steering damper mount?

Thats exactly what i want to do for my disco.

Is it modified, or off the shelf from somewhere?

Cheers,

James.

Hi James,

The guard is from AMV in ringwood vic, i had the guy who made my roll cage modify it to mount the damper, he did an awsome job..

Cheers

Steve

Post by **1103.9TD** » Tue Jan 23, 2007 11:23 pm

Post by **D110V8D** » Wed Jan 24, 2007 12:04 am

schuler wrote:
TRobbo wrote:I like the modification of the steering guard to hold the steering dampner. What is the brass coloured bracket bolted to the chassis for?
Hi the brass coloured bracket is a maxi-drive bracket to relocate the damper, but i couldn't get it to line up. Bloody custom cars!!

Steve

Hey Steve,

Now that I've seen it I know what your on about.

The maxi bracket has to go on an angle, towards the front of the car. The "bend" in the bracket should face towards the drivers side.

Doesn't look like you need it now anyway.

Post by **Hardy** » Fri Feb 16, 2007 1:42 pm

UPDATE

1999 4.0 Range Rover

Currently has:
255/85 16 Maxxis Bighorns
4.1 GBR Diff Ratios
ARB Airlocker in rear
EBC Slotted Rotors & Greenstuff Pads
Arnotts GEN III Airsprings
Custom Shocks
50mm Spring Spacers
EAS Program & Hardware mods
On board Air - 25L @ 135 PSI
Unichip & straight through exhaust
Custom Front Bar
And ROVACOM...

Post by **ISUZUROVER** » Fri Feb 16, 2007 3:12 pm

Looks good mate - what do you think of the maxxis and how long have you had them?

Post by **Hardy** » Fri Feb 16, 2007 3:27 pm

Had the Maxxii for about 4 months now, so wear is neglible.

Very rare size, especially in a mud pattern.
Price was great - about $225 ea I think.

All round performance is just fine.
Grip in the bush is dandy, better than any other tyre I've had.
Rocks haven't bothered them, not like the Cooper S/T losing chunks.
Deflated - they have reasonable side biters that help when bagged out on rocks and the profile makes them akin to caterpillar tread on sand.

They make quite a whirry noise on road - doesn't bother me.
The taller profile doesn't help handling much - bit of sway on the round-a-bouts etc but I have another car for that sort of thing...

Hardy

Post by **ISUZUROVER** » Fri Feb 16, 2007 3:43 pm

Hardy wrote: The taller profile doesn't help handling much - bit of sway on the round-a-bouts etc but I have another car for that sort of thing...

What pressure do you run them on? I found the same with my 285/75/16 MTRs until I increased the pressure to 45psi (and surprisingly they are wearing evenly).

Does the "caterpillar tread" mean they are good or bad in sand?:

Post by **Hardy** » Fri Feb 16, 2007 4:18 pm

Hmmm, usually only 35psi.
I might experiment with your idea of 45psi, see what happens - Ta.

Caterpillar tracks are good. I usually only deflate on sand when the 'de-bogging' of some lesser vehicle is required...

Hardy

Post by **rusty_042** » Sat Feb 17, 2007 5:28 pm

this was mine when i first got it as a stocko classic with a 5ltr in it

Post by **86MUD** » Sun Feb 18, 2007 10:06 am

just a poser shot..prior to maxi's and longer shocks...

F & R maxi's plus 4.11 cw&p and longer shocks are being installed shortly

Cheers

Andrew

Post by **UrbanRedneck** » Mon Feb 19, 2007 6:38 pm

just thought i would share some pics of my rig nothing special just great fun

Post by **brooksy** » Sat Feb 24, 2007 12:12 am

Here is my '03 V8 Disco

4" lift
33's
Edelbrock remote reservoirs
Custom shock mounts
13" travel airbags
Custom MT rims 4" wider wheel track
Custom barwork
Lockers
etc ......

brooksy

Post by **MUD400** » Tue Feb 27, 2007 8:38 pm

Post by **Bourbon** » Thu Mar 01, 2007 6:57 pm

some picks of my 113 landy,ls2 6 L ,4080e fully manulized gq transfer h260 gu rear diff air locker gu front ,four bucket seates , hydro asist steer

Post by **def90** » Sat Mar 03, 2007 7:46 am

hey bourbon thats a massive rig!!

is that her normal ride height?

Post by **Bourbon** » Sat Mar 03, 2007 10:36 am

going down about 6 inc but can winde it up and down

Post by **Micka** » Mon Mar 05, 2007 1:14 pm

Tell me that you have dust sealed it and fixed the shitty aircon while you were throwing all of the other goodies in.

And 37s rock on Defenders...but they look too small on yours

Post by **Bourbon** » Mon Mar 05, 2007 4:07 pm

air thrown out ,only made more holes in it so far

Post by **Lucus** » Thu Mar 08, 2007 7:29 pm

How does one attach photos to posts on this site?

cheers

Luke

Post by **Bourbon** » Thu Mar 08, 2007 9:27 pm

go to photo bucket hook up an acount it is free

Post by **brooksy** » Fri Mar 09, 2007 8:48 pm

Couple of pics of the Disco at a recent photo shoot.

brooksy

Post by **MUD400** » Fri Apr 27, 2007 10:51 am

a few New images before the roof was chopped.. (will post roof chop pic soon.)

Post by **mickrangie** » Fri Apr 27, 2007 5:50 pm

Bourbon wrote:some picks of my 113 landy,ls2 6 L ,4080e fully manulized gq transfer h260 gu rear diff air locker gu front ,four bucket seates , hydro asist steer

Too bad about the tray......

Post by **matsmad** » Sun May 13, 2007 10:56 am

Im a Nissan boy, but this is my first Rover. A 1995 series 1 Discovery TDI. Came with TJM bullbar, Safari snorkel, cargo barrier, dual batteries. Ive since put 2" lifted coils, coil spacers, 2" body lift and 285/75/16 BFG All terrains on standard 16x7 rims. Also had to guard chop. Got a lot more plans too.

Outer Limits 4x4 Board

POST UP YOUR ROVERS

113

rover

Who is online