Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Suzi ute project time

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Posts: 1380
Joined: Tue Mar 18, 2008 11:40 am
Location: Perth, WA

Post by bakerboy »

cheers guys, yeah we will hopefully have a full size spare sitting on the tray to help with the weight balance
mike_nofx wrote:Is "Athol" what people with a lisp call him??
RAY185 wrote:I think it's delightful! So does my wife Bill.
Posts: 4
Joined: Sun Oct 25, 2009 6:28 pm
Location: perth

Post by broomeboy87 »

so guys here we have our new engine picked up a baleno i think its spealt 2001 model with the fuel injected 1.6 with 136000 on the clock as a repairable write off for a 600 bucks today so we have ourselves a donor engine and computer and seats and at a grand less than what wreckers want to charge for just an engine. so here are some pics of the new donk

from one side
Image

and the other
Image
Posts: 1380
Joined: Tue Mar 18, 2008 11:40 am
Location: Perth, WA

Post by bakerboy »

ok so for the time being we will run lux springs, as we can get about a dozen leaf packs for a slab so we have plenty to experiment with. will work out later what shocks (compression and extension wise) we will need, however what is the general consensus? i know commie wagon shocks are used but i measured the gabriel ones up at work and they only had 9" of travel :?
mike_nofx wrote:Is "Athol" what people with a lisp call him??
RAY185 wrote:I think it's delightful! So does my wife Bill.
Posts: 377
Joined: Fri Jan 06, 2006 4:03 pm
Location: Perth

Post by VR Rodeo »

The commo shocks are better suited to 2inch stock zook springs
'92 Rodeo - VR V6, T700, 31's
'89 Zook - 4 inch lift, 32's, 5.14 gears, RUF, F&R Lockrights, Rear Disconnect, Falcon/Landcruiser PS
Posts: 1325
Joined: Wed Jul 04, 2007 4:13 pm
Location: brisbane australia..logan reserve

Post by 11_evl »

a torana thermostat housing fits on the head ;)
michael
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Post by alien »

look into bluemax shocks - they're ample for my travel, which is pretty decent (and lux leaves).
The worst thing about censorship is ███████.
Posts: 1663
Joined: Mon Nov 04, 2002 6:38 pm
Location: bethania QLD

Post by oozuk »

grimbo wrote:you wont fit an internal cage and people into a Ute cab.
I beg to differ, there's a few factory ute sierra's running around with internal roll cages in SE QLD and they fit well, the key to them is having a good cage builder to make nice tight bends that dont cramp on cabin space
Trying to finish the Zook

OOZUK buildup
http://www.outerlimits4x4.com/viewtopic.php?t=80949
***KING OF BLING***
Posts: 1380
Joined: Tue Mar 18, 2008 11:40 am
Location: Perth, WA

Post by bakerboy »

picked the tyres up friday night :D 34" simex JTs with beadlockers :D

wacked them on the paj, omfg death wobbles between 45-55 is insane. no longer driving the paj atm, need a good balance before i try again :lol:
mike_nofx wrote:Is "Athol" what people with a lisp call him??
RAY185 wrote:I think it's delightful! So does my wife Bill.
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Post by alien »

dont know what the 34 JTs are like, but my 31 ETs needed tubes - mud kept getting into the bead and leaking air... I notice my ET's get a nice flat spot overnight too =) haha first few km in the morning is a nice wobble till they round out or i do over 80km/hr (rotational force/heat).
The worst thing about censorship is ███████.
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

alien wrote:dont know what the 34 JTs are like, but my 31 ETs needed tubes - mud kept getting into the bead and leaking air... I notice my ET's get a nice flat spot overnight too =) haha first few km in the morning is a nice wobble till they round out or i do over 80km/hr (rotational force/heat).
x2
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Posts: 1380
Joined: Tue Mar 18, 2008 11:40 am
Location: Perth, WA

Post by bakerboy »

ill look into it, but they are also beadlocked
mike_nofx wrote:Is "Athol" what people with a lisp call him??
RAY185 wrote:I think it's delightful! So does my wife Bill.
Posts: 1380
Joined: Tue Mar 18, 2008 11:40 am
Location: Perth, WA

Post by bakerboy »

picked up james today, tray is off, dash, steering, seats all interior, engine is out and tomorrow it will be stripped down to a chassis and the suspension will be started on, cheers to Dave at coastals for the set of leafs mate, will be coming back for more gear later down the track for sure
mike_nofx wrote:Is "Athol" what people with a lisp call him??
RAY185 wrote:I think it's delightful! So does my wife Bill.
Posts: 1380
Joined: Tue Mar 18, 2008 11:40 am
Location: Perth, WA

Post by bakerboy »

Image
Image
thats the fuel line plug :D
Image
Image
Image
Image
Image
Image
mike_nofx wrote:Is "Athol" what people with a lisp call him??
RAY185 wrote:I think it's delightful! So does my wife Bill.
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

alien wrote:the hose off the manifold is useless anyway - it just channels warm air to the air box for cold starts =)

Looks like this is going to be a nice build up!
I'd hardly call it useless... You try driving one in victoria in winter with out it!
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Posts: 377
Joined: Fri Jan 06, 2006 4:03 pm
Location: Perth

Post by VR Rodeo »

Ruffy wrote:
alien wrote:the hose off the manifold is useless anyway - it just channels warm air to the air box for cold starts =)

Looks like this is going to be a nice build up!
I'd hardly call it useless... You try driving one in victoria in winter with out it!
Good thing both of them are in WA then hey ;)

Looking good Bakerboy
'92 Rodeo - VR V6, T700, 31's
'89 Zook - 4 inch lift, 32's, 5.14 gears, RUF, F&R Lockrights, Rear Disconnect, Falcon/Landcruiser PS
Posts: 1183
Joined: Thu Jul 01, 2004 5:05 pm
Location: Tewantin

Post by flyinwall »

can i recommend you get rid of the little fuel tank and put in a hilux tank like i did on "project gremlin"

you can just see it here and it is tucked up nice and high

Image

Image
R.I.P. Darryl "DAZZA" Mutch 02/08/1978 - 26/08/2012 aged 34 years ... You will be missed my little brother.

http://www.outerlimits4x4.com/viewtopic.php?f=16&t=39190&start=150
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Post by alien »

^^ cool idea - move weight more centrally though - in zuks we need more weight towards the rear for better balance - i'd have shifted it back over the rear diff.
The worst thing about censorship is ███████.
Posts: 4
Joined: Sun Oct 25, 2009 6:28 pm
Location: perth

Post by broomeboy87 »

yeah that is a good idea we will prolly do something like that cheers
Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests