Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

gas for MIG welding

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 257
Joined: Thu Nov 27, 2003 10:22 pm
Location: Stanthorpe- QLD

gas for MIG welding

Post by Snarba »

Hi there just got a question, for welding steel and occasionaly gal steel should I use Argoshield or welding grade Argon? the argoshield is cheaper but you can't get it in a small size cylinder.....which is what I want to keep it as portable as possible. The W grade Argon is more expensive but I can get it in the small cyl which is what I need. p.s I only have a Unimig 172 so I want to keep it a small unit. I have tried the gasless wire but I think the gas would work better.....any thoughts?
I've got a WEAPON OF MOSS DETRUCTION
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

streight argon will give poor welds with mild steel, it will work but not the best
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

You want argo shield.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

argoshield is both better and cheaper. But I have done some steel welding with argon, and while it is nowhere near as good, it will stiilll work.

But get argoshield if at all possible.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 2513
Joined: Sat Mar 05, 2005 1:14 am
Location: ingleburn

Post by familybus »

get some Migsheild or Bluesheild 23 instead!
[color=lime][b]Im not a gyno but ill take a look at it for you![/b][/color]
Top
Posts: 459
Joined: Sat Jul 29, 2006 8:39 pm
Location: brisbane (boganhole)

Post by short stuff »

my work uses co2
Top
Posts: 1076
Joined: Tue Jul 27, 2004 8:49 am
Location: cashmere

Post by eliteforce32 »

or some lighter gas corgan5/2
Eliteforce Heavy Fabrication
Proud supporter of these businesses:-
Pig Dog Shop(hunting)- Greg 0448024776
CrispProducts(Racetec Gauges)-Chris(pm him)
Fourbies at Moorooka- Ryano
Top
Posts: 58
Joined: Sun Jun 10, 2007 5:06 am

Post by krf_bb »

argosheil technical grade is the best
Top
Posts: 722
Joined: Fri Sep 29, 2006 7:40 pm
Location: QLD

Post by zagan »

Go the argo, it's safer health wise if your worried about that.

CO2 isn't safe health wise.
Top
Posts: 1187
Joined: Sat Nov 01, 2003 5:05 pm
Location: melbourne, Knoxfield

Contact:
Contact matthewK

Post by matthewK »

argo sheild light will do it :) or corgan
1995 land rover disco on 265 muddies
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

argo ;)
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 432
Joined: Wed Jun 13, 2007 7:46 pm
Location: Tamborine, QLD. QUEENSLANDER!!!!!!

Post by dano80 »

Argosheild light. I know you can get it in a couple of sizes. I think the one I have now is a "D" size about a metre high.....the one I used to have was about 600mm, from memory it was a "C" size. but obviously you will go through them a lot quicker.
Top
Posts: 389
Joined: Sat Mar 05, 2005 8:06 am
Location: campbelltown/penriff

argon

Post by noelb1 »

hey quick q I have to get a small bottle aswell, whats one worth ?
Top
Posts: 2513
Joined: Sat Mar 05, 2005 1:14 am
Location: ingleburn

Re: argon

Post by familybus »

noelb1 wrote:hey quick q I have to get a small bottle aswell, whats one worth ?
i got a E size Bluesheild 23 for sale! its empty but yah never have to pay rental again ;)
[color=lime][b]Im not a gyno but ill take a look at it for you![/b][/color]
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Re: argon

Post by RUFF »

familybus wrote:
noelb1 wrote:hey quick q I have to get a small bottle aswell, whats one worth ?
i got a E size Bluesheild 23 for sale! its empty but yah never have to pay rental again ;)
Although to get it swapped over you will need to know someone with a gas account somewhere. At least in QLD you can no longer get bottles re-filled. And you can no longer "own" your own bottle. You must have an account to "hire" a bottle and then you can swap it over when empty. Its around $150 a year to hire an E size bottle + what ever the gas is worth. In the last 3 years i have spent $400 in bottle hire and am still on my first bottle. The hire is the killer :bad-words:
Top
Posts: 936
Joined: Fri May 26, 2006 4:31 pm
Location: Sunshine Coast, QLD

Post by Mulisha »

I have a MIG welder i learnt to weld without gas at all just using bunnings .8mm wire :?

Does gas help out much becuase sometimes when i'm welding the welder will sound like it's pausing and sh1t..

Rick.

Sorry for the hijack ;)
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Mulisha wrote:I have a MIG welder i learnt to weld without gas at all just using bunnings .8mm wire :?

Does gas help out much becuase sometimes when i'm welding the welder will sound like it's pausing and sh1t..

Rick.

Sorry for the hijack ;)
You must be using Flux core wire?

Otherwise your not going to get a decent weld without gas. It will be full of pourosity.
Top
Posts: 936
Joined: Fri May 26, 2006 4:31 pm
Location: Sunshine Coast, QLD

Post by Mulisha »

RUFF wrote:
Mulisha wrote:I have a MIG welder i learnt to weld without gas at all just using bunnings .8mm wire :?

Does gas help out much becuase sometimes when i'm welding the welder will sound like it's pausing and sh1t..

Rick.

Sorry for the hijack ;)
You must be using Flux core wire?

Otherwise your not going to get a decent weld without gas. It will be full of pourosity.
I couldn't say to be honest the wire i brought said that it's ment for Mild steel..

I welded a enclosed motocross trailer without gas but not i kinda think i may need it to get nicer welds etc..

Rick.
Top
Posts: 722
Joined: Fri Sep 29, 2006 7:40 pm
Location: QLD

Post by zagan »

Bunnings would be flux core wires they don't sell anything else.

a Reel (15kg) of mild will cost around $20 unless it gone up, from trade tools.

Stinless $40

Ali $60

I'd take you probably didn't pay those prices, I'm glad I don't need to worry about buying reels at work :) I've done a 15kg reel in a day, mainly last about 4 1/2 days normally.
Top
Posts: 563
Joined: Sat Nov 13, 2004 10:22 pm
Location: Morayfield, Qld

Contact:
Contact Mrs Ludacris

Post by Mrs Ludacris »

Gasless wire is the best for welding Galvanised. Also good for windy conditions. I got my first year of bottle hire half price :D . A new roll of 15kg wire and E size migshield M1 cost me $110.

LudaCris
www.4x4accessories.com.au
Top
Posts: 389
Joined: Sat Mar 05, 2005 8:06 am
Location: campbelltown/penriff

Post by noelb1 »

can anyone get a gas account or do you have to be a business ?
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

noelb1 wrote:can anyone get a gas account or do you have to be a business ?
Anyone can get an account.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 146 guests