How do i check if my EGR is blocked??? i have a 2003 3.0td (1kz-te).
Thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
how do i check if my EGR is blocked????
Moderators: toaddog, Elmo, DUDELUX
how do i check if my EGR is blocked????
Email - flossamarosus@hotmail.com
Ask here R.A.G.4X4 or here TOYOTA SURF
LANDCRUISER GXL 80series 4.2TD
[url=http://www.rag4x4.com]R.AG. 4X4 Club
RUFF~AS~GUTS[/url]
[url=http://www.rag4x4.com]R.AG. 4X4 Club
RUFF~AS~GUTS[/url]
easy way to check to see if its blocked is to block it preferably at the exhaust end but commanly done at the inlet manifold.
there is no top HP change as the egr system is off at full throttle, but you will notice an increase in performance at part throttle.
one thing tho....it pays to disable the butterfly as well. however i'm not familar with the setup so i can't tell you which bit to disconnect. it will run a lot better with the butterfly disabled.
there is no top HP change as the egr system is off at full throttle, but you will notice an increase in performance at part throttle.
one thing tho....it pays to disable the butterfly as well. however i'm not familar with the setup so i can't tell you which bit to disconnect. it will run a lot better with the butterfly disabled.
egr
reason i wanna check is cos i now have vacumn when i turn the car off. it reads -20 on the boost/vac gauge when i turn it off for a second then goes to zero.
someone on here said i might have it blocked and to check it and plus my turbo isnt boosting much (used to boost 11 psi) now does 8psi and struggles to do that so i thought i should check, i have been told it could be part of the problem
someone on here said i might have it blocked and to check it and plus my turbo isnt boosting much (used to boost 11 psi) now does 8psi and struggles to do that so i thought i should check, i have been told it could be part of the problem
Email - flossamarosus@hotmail.com
Who is online
Users browsing this forum: No registered users and 4 guests