Hey guys.
a mate of mine has a 82 f50 and has kinda destroyed his transfer case.
now we are after a cheap easy fix.
swap gearboxes?
change transfers?
rebuild transfer?
other options?
any help/advice is most appreciated.
or if anyone has any parts they'd donate/sell let me know.
cheers
john
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
82 f50 issues.
Moderator: Tiny
82 f50 issues.
i have a drover
its pink.
that is all.
its pink.
that is all.
nup.
They changed a few things, someone here should know for sure but I think most if not all, as a complete unit, are interchangeable between year models. But gearing changed a fair bit, and the one's I have spare have vacuum operated 4x4, which might be a pita, whereas old school ones just have a lever.
They changed a few things, someone here should know for sure but I think most if not all, as a complete unit, are interchangeable between year models. But gearing changed a fair bit, and the one's I have spare have vacuum operated 4x4, which might be a pita, whereas old school ones just have a lever.
60 + Turbo, 33"s :armsup:
Yeah if they are like the pics from RockyF70, then definitely time to get them replaced
If it is damage to gear similar to the top two pics I would also suggest looking for a local gear maker or even contacting your nearest TAFE that teaches fitting and machining. Teachers at TAFE are generally willing to knock a gear or two up at a pretty decent price (Just make sure they will heat treat it correctly too).
But if it is like his bottom pic, with the two rows of teeth. They wouldn't have a gear shaper that could do it.
If all else fails you can always Try 'Gear Makers' in Kirrawee (Sydney), you would have to post the gears up to them but it may end up cheaper than a whole replacement box.
Good luck with it....
If it is damage to gear similar to the top two pics I would also suggest looking for a local gear maker or even contacting your nearest TAFE that teaches fitting and machining. Teachers at TAFE are generally willing to knock a gear or two up at a pretty decent price (Just make sure they will heat treat it correctly too).
But if it is like his bottom pic, with the two rows of teeth. They wouldn't have a gear shaper that could do it.
If all else fails you can always Try 'Gear Makers' in Kirrawee (Sydney), you would have to post the gears up to them but it may end up cheaper than a whole replacement box.
Good luck with it....
http://www.bushranger.com.au/
'84 F70 Rocky :)
'97 Paj GLS LWB - HEHE
RIP ... My Feroza II SXP
'84 F70 Rocky :)
'97 Paj GLS LWB - HEHE
RIP ... My Feroza II SXP
Who is online
Users browsing this forum: No registered users and 3 guests