Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GU 4.2 turbo 3" exhaust

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Posts: 343
Joined: Fri Jun 18, 2004 3:25 pm
Location: Melbourne

GU 4.2 turbo 3" exhaust

Post by EricB »

Hi Guys

I am in the eastern suburbs of Melbourne and was wondering if anyone can recommend an exhaust place.

I am after a 3" mild steel exhaust and dump pipe for a GUII 4.2TD.

Does anyone pre make a bolt on system or will it have to be custom made?

Cheers
Eric
2000 GU II 4.2TD
Posts: 171
Joined: Sat Feb 11, 2006 1:38 pm
Location: Brisbane

Post by Wilko76 »

mate

About a month ago fitted a beaudesert 3" with dump pipe to my 4.2 GU. Fitted straight on with no issues. highly recommend.

not sure about melbourne but i am sure they will ship. got it tuned and it hammers
Posts: 343
Joined: Fri Jun 18, 2004 3:25 pm
Location: Melbourne

Post by EricB »

Cool sounds like they ship all over Aus too. I have emailed for a quote.
What did you pay for yours?

I have had 1 quote in melb for a mild steel custom build.
$1000
Its just hard to be without the car for 2 days to have it done.
2000 GU II 4.2TD
Posts: 693
Joined: Sun Sep 26, 2004 2:37 pm
Location: Rochedale South - Brisbane

Post by benhl »

Beaudesert will ship anywhere in Aus AFAIK. I have their system also - top darts! Love it to bits, Pulls hard and whistles like a true TD should!
GU 4.2 TD Garrett BB Hi-flow, M8274 + Bells & Whistles with plenty of fruit still on the list!
[b][color=red]\ m / ( > . < ) \ m /[/color][/b]
Posts: 936
Joined: Fri May 26, 2006 4:31 pm
Location: Sunshine Coast, QLD

Post by Mulisha »

Wats with all these high quotes?

I got a full 3" mild steel exhaust and also screamer pipe put in off my wastegate and chrome bling 3.5" tip and all new mounts and re angled dump pipe for $550 took then a bit over half a day. This was on the Tb42 though and also had a resiantor and straight thru muffler fitted but muffler got taken out and sold so was only $500 in the end haha

Rick.
Posts: 343
Joined: Fri Jun 18, 2004 3:25 pm
Location: Melbourne

Post by EricB »

thats cheap

just got a quote from Beaudesert

$1025 delivered to Melb
2000 GU II 4.2TD
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

Performance Exhausts in Ringwood did the exhaust on my Mav.
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Posts: 618
Joined: Sun Mar 05, 2006 2:19 pm
Location: wakka wakka land

Post by weeman »

Try uniquie exhausts in bayswater have done a shit load of them...

should be around $500 with no mufflers
For all your HID and LED stuff
http://offroadindustries.com.au/

Check us out on Facebook for weekly specials
www.facebook.com/pages/Offroad-Industries/137501182955527
Posts: 1443
Joined: Tue Apr 12, 2005 3:57 pm
Location: Brisbane

Post by vanbox »

$690 for GU ute, no muffler, no dump pipe. expect low to mid $200 for dump.

PAUL
MUD BEERS and MAYHEM

DURAMAX POWERED GU
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

EricB wrote:thats cheap

just got a quote from Beaudesert

$1025 delivered to Melb
cheaper than the quote I got

Lilydale Exhausts did mine when I had the powerup done by Dieseltec. its good :)
Posts: 343
Joined: Fri Jun 18, 2004 3:25 pm
Location: Melbourne

Post by EricB »

Just got another quote from bay side exhaust for $500-$600 3" mandril bent mild steel.

inc
1 flex section because of the diesel vibration
1 straight through muffler

sounds better :)
2000 GU II 4.2TD
Posts: 343
Joined: Fri Jun 18, 2004 3:25 pm
Location: Melbourne

Post by EricB »

bogged wrote:
EricB wrote:thats cheap

just got a quote from Beaudesert

$1025 delivered to Melb
cheaper than the quote I got

Lilydale Exhausts did mine when I had the powerup done by Dieseltec. its good :)
I am looking at a tune after the exhaust.

What power up did you get Bogged? They range from $400 to $17,000
2000 GU II 4.2TD
Posts: 783
Joined: Sat Jul 09, 2005 6:57 pm
Location: geelong

Post by GQ4.8coilcab »

EricB wrote:
bogged wrote:
EricB wrote:thats cheap

just got a quote from Beaudesert

$1025 delivered to Melb
cheaper than the quote I got

Lilydale Exhausts did mine when I had the powerup done by Dieseltec. its good :)
I am looking at a tune after the exhaust.

What power up did you get Bogged? They range from $400 to $17,000
the old man has the stage 2 MTQ kit on his td42t with a 3 inch exhaust and an MTQ dump pipe, made a 108.7kw at the rears on 35s at 11psi. When you get the exhaust done, get them to weld in a nut for a pyro, when a good dyno tuner tunes it, they will check EGT's.
[color=red][size=150][b]CTRL + W[/b][/size][/color]
Posts: 343
Joined: Fri Jun 18, 2004 3:25 pm
Location: Melbourne

Post by EricB »

GQ4.8coilcab wrote:
EricB wrote:
bogged wrote:
EricB wrote:thats cheap

just got a quote from Beaudesert

$1025 delivered to Melb
cheaper than the quote I got

Lilydale Exhausts did mine when I had the powerup done by Dieseltec. its good :)
I am looking at a tune after the exhaust.

What power up did you get Bogged? They range from $400 to $17,000

the old man has the stage 2 MTQ kit on his td42t with a 3 inch exhaust and an MTQ dump pipe, made a 108.7kw at the rears on 35s at 11psi. When you get the exhaust done, get them to weld in a nut for a pyro, when a good dyno tuner tunes it, they will check EGT's.


Cool. Will the exhaust guy know what size nut and where to put it?
2000 GU II 4.2TD
Posts: 783
Joined: Sat Jul 09, 2005 6:57 pm
Location: geelong

Post by GQ4.8coilcab »

EricB wrote: Cool. Will the exhaust guy know what size nut and where to put it?
mmm dont know. i think it was 22mm bolt to suit an o2 sensor if that helps :?
[color=red][size=150][b]CTRL + W[/b][/size][/color]
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Post by PGS 4WD »

I get them straight off the shelf at MTQ (DTS) I fit heaps of them, 3" straight through muffler, and dump pipe, I do an exhaust kit with dyno, adjust boost and fuel, usually nets about 30% increase with no increase in exhaust temps from standard in GU TD42.

Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
User avatar
ddr
Posts: 589
Joined: Thu Jan 09, 2003 7:44 am
Location: Not where I wanna be

Post by ddr »

weeman wrote:Try uniquie exhausts in bayswater have done a shit load of them...

should be around $500 with no mufflers
Is that WITH dump pipe too?
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

ddr wrote:
weeman wrote:Try uniquie exhausts in bayswater have done a shit load of them...

should be around $500 with no mufflers
Is that WITH dump pipe too?
doubt it...
Posts: 343
Joined: Fri Jun 18, 2004 3:25 pm
Location: Melbourne

Post by EricB »

A few guys have said put a flex section in the system so the diesel doesnt rattle it apart.
2000 GU II 4.2TD
Posts: 748
Joined: Tue Nov 09, 2004 9:45 pm
Location: Lilydale

Post by Dzltec »

It would be wise to take aboard that info. As you are finding out, there are exhausts and then there are exhausts.

Cheapest is to get the local exhaust guy to do it, we use Exhaust Fix in lilydale, knows his stuff, is very neat in finish. Then there are the kit 3" systems you fit yourself.

At the end of the day you pay for what you get, we have fitted beaudesert and taipan systems as well. It all boils down to the finish you want and how much you want to pay, and the advertising speal that they have.


Andy
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Posts: 262
Joined: Mon Sep 20, 2004 2:13 pm

Post by evil_hitman »

i have a beaudesert myself.
price is around what you were quoted (with muffler) but i also got a straight through section so i can swap.
beaudesert is fully flanged in factory locations, includes dump with point to put in a pyro.
Kit is great and it fits. no stuffing around, just bolt it in and away you go. will take a few hours (hardest part is the dump pipe) and means you only have the car off the road when it suits you.

Costs more but is proven.

Matt
2000 GU ST Patrol 4.2 turbo oiler not so bog stock anymore
"EVILGU"
Posts: 343
Joined: Fri Jun 18, 2004 3:25 pm
Location: Melbourne

Post by EricB »

yeah plus it aluminized steel which not many places do in mandril bends unless they have the mandril bending machine.
2000 GU II 4.2TD
Posts: 82
Joined: Thu Jan 13, 2005 6:45 pm
Location: Brisbane

Post by red80 »

What sort of increases are you getting with just the exhaust fitted, I heard even only exhaust makes a decent power boost.
Posts: 783
Joined: Sat Jul 09, 2005 6:57 pm
Location: geelong

Post by GQ4.8coilcab »

red80 wrote:What sort of increases are you getting with just the exhaust fitted, I heard even only exhaust makes a decent power boost.
exhaust is very little until you get a good dyno tune
[color=red][size=150][b]CTRL + W[/b][/size][/color]
Posts: 262
Joined: Mon Sep 20, 2004 2:13 pm

Post by evil_hitman »

for me the exhaust itself had little to no effect.
but sounds good. however, when i removed and plugged the blow-off valve it made a noticeable difference (was able to pull 3rd low on a hill that 30 mins earlier i could just do 2nd low) i imagine the gain wouldn't be as good if i didn't have the pipe. however all this means sweet f-all without a dyno run.

doing this all in prep for some boost/tuning work. This is what will make the real difference and the pipe is just part of it.


Matt
2000 GU ST Patrol 4.2 turbo oiler not so bog stock anymore
"EVILGU"
Posts: 343
Joined: Fri Jun 18, 2004 3:25 pm
Location: Melbourne

Post by EricB »

nice

So a few people have talked around 90 + rwkw after a 3" and a tune with a little more boost.

Does anyone know the rwkw on a totally stock 4.2TD might be?

Would it be like 75 rwkw?
2000 GU II 4.2TD
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

EricB wrote:nice

So a few people have talked around 90 + rwkw after a 3" and a tune with a little more boost.

Does anyone know the rwkw on a totally stock 4.2TD might be?

Would it be like 75 rwkw?
bout that.. its pretty hideous when you think about the size of the motor with turbo. shows how under powered it rteally is :( .. one afternoon at Andys at Dieseltec and its a new car dude, you wouldnt regret it.
Posts: 748
Joined: Tue Nov 09, 2004 9:45 pm
Location: Lilydale

Post by Dzltec »

Factory td42t patrols are putting out anywhere between 62 ish to 80 rwkw and anything in between.

Once you have a 3", with boost and fuel adjustments we set non i/c to around 85-90 rwkw and i/c to 90-95.


It transforms the vehicle.


Andy
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Post by PGS 4WD »

Dzltec wrote:Factory td42t patrols are putting out anywhere between 62 ish to 80 rwkw and anything in between.

Once you have a 3", with boost and fuel adjustments we set non i/c to around 85-90 rwkw and i/c to 90-95.


It transforms the vehicle.


Andy
My figures agree with this 100%, anyone quoting over 100 rwkW is either on an innacurate dyno or running way too hot, as I'm sure Andy would know its quite possible to set these up without any increase in exhaust temp.

Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Posts: 343
Joined: Fri Jun 18, 2004 3:25 pm
Location: Melbourne

Post by EricB »

Ive only had the car a few weeks and tonight I thought id open up the air cleaner box and check the filter and look around it before I order a snorkel.

It had one of the re-usable air filters that had not been cleaned for ages.

It had moths stuck to it and one side had that much dirt I dont know how the engine ran :(

I didnt have a cleaning kit so I washed it our with Turps (was the only thing that removed the oil and dirt) and then sprayed with a little WD40 until I buy a kit for it tomorrow.

I probably just gained 5kw LOL
2000 GU II 4.2TD
Post Reply

Who is online

Users browsing this forum: No registered users and 59 guests