Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ King Pins, shimming

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 810
Joined: Thu Jul 15, 2004 8:02 am
Location: Somewhere in NSW

GQ King Pins, shimming

Post by brighty »

How do you know how much shimming to preload the king pins?? Am going to be doing a full swivel hub rebuild this weekend and not sure on how to do the king pin side of things.

I've done a few swivel hub rebuilds on landcruisers and just put the original shims that were in there back in & all worked ok. Just wondering if this is still ok.
When in doubt..... UTE-ERIZE it!!!
Top
Posts: 36
Joined: Fri Apr 04, 2008 6:25 am
Location: OLD South Wales

Post by Welsh_farmer »

Image
Top
Posts: 195
Joined: Sun Apr 20, 2008 10:10 pm
Location: sunshine coast

Post by patrol28 »

so with the tools you have in hand just make shore it feels right
https://www.suspensionstuff.com.au/shop/product_info.php?cPath=137_40_69&products_id=996
Top
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Contact:
Contact coxy321

Post by coxy321 »

And if it turns out that you DO need to buy shims (pretty sure 90% of the GQ kits dont come with a selection), i found that Pedders are the mob to get them through.

Nissan wanted something stupid like $2 per shim when i asked. Pedders had a whole shim kit for $15 from memory (dont quote me).

Coxy
Top
Posts: 810
Joined: Thu Jul 15, 2004 8:02 am
Location: Somewhere in NSW

Post by brighty »

coxy321 wrote:And if it turns out that you DO need to buy shims (pretty sure 90% of the GQ kits dont come with a selection), i found that Pedders are the mob to get them through.

Nissan wanted something stupid like $2 per shim when i asked. Pedders had a whole shim kit for $15 from memory (dont quote me).

Coxy
Yeah, I went to Nissan and nearly told the guy they have to be FARK!N kidding themselves.... depending on thickness, they ranged in price from $2.80 to 19.00.... EACH. :shock:

So I went to repco and bought some shimming paper and made my own to suit!!!
When in doubt..... UTE-ERIZE it!!!
Top
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Contact:
Contact coxy321

Post by coxy321 »

Yes, i also had cramping of the schphincter when i was given the prices. I thought $19 for a shim kit was cheap enought, and then he said "...no, thats's $xx EACH.."

Coke cans anyone??

I noticed the other day my drivers side inner hub/brake rotor seal has chewed out. Looks like i'll be up for another kit and also axle seals next time. PITA.

Coxy
Top
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

i took my shims out

helps stop the dredded GQ wobble

not recommeded will cause excess wear on steering pump and associated parts
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Top
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Contact:
Contact coxy321

Post by coxy321 »

How much pressure do you have on the swivel hub bearings??!!! :shock:
Top
Posts: 810
Joined: Thu Jul 15, 2004 8:02 am
Location: Somewhere in NSW

Post by brighty »

coxy321 wrote:How much pressure do you have on the swivel hub bearings??!!! :shock:
bolts are tightened to 40Nm as per specs in the manual(30-40Nm), and preload on the swivel housing is approx at 1.5-1.75kg drag

my manual states it should be within 0.5kg-1.75kg range which I thought was a large variance really, so I thought if it's done to the stiffest end of the range it would be better. In saying that, it still swivels nice and smoothly but not stiff.
When in doubt..... UTE-ERIZE it!!!
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests