TD42 HEAD BOLTS

[Red Rover]

I have just been told that they are not reuseable as they are a stretch bolt. Is this true?

[bogged]

I have just been told that they are not reuseable as they are a stretch bolt. Is this true?

would ya risk it? few bolts couldnt be that expensive .. could they

[Red Rover]

nope, but i have since done more investigating a yes they are a stretch bolt. Pulling the motor down so it will take the turbo so I'll do the full rebuild kit ie pistons liners the whole shebang..... so she don't go shebang with the turbo.

[bogged]

nope, but i have since done more investigating a yes they are a stretch bolt. Pulling the motor down so it will take the turbo so I'll do the full rebuild kit ie pistons liners the whole shebang..... so she don't go shebang with the turbo.

be interesting to see how much the whole rebuild kit costs you...
bet the bolts arent cheap. :(

[Red Rover]

$80 for the bolts. By the way i am keeping the maverick. Pajero was nice but it's pretty hard to hurt the old GQ

[Daisy]

Aye i ended up payin 1400 for the rebuild kit.

Havent gotten the headbolts yet. I'll find out how much they are once I get a reco'd TD42 head

TOM

[bogged]

Aye i ended up payin 1400 for the rebuild kit.

talkin to a mate, that price wasnt genuine Nissan kit was it for $1400?

[Red Rover]

will be up & running on the weekend. head is like brand new no cracks, valves not mushroomed over looks realy really good. Just a hone, new rings bobs your uncle. A fresh up and a turbo to boot

[Daisy]

Aye i ended up payin 1400 for the rebuild kit.

talkin to a mate, that price wasnt genuine Nissan kit was it for $1400?

No idea on the kit name. I rang up nearly 12 different places. their prices ranged from 1400 to 2000 for the engine rebuild kit to suit TD42

Had no choice.

TOM

[Red Rover]

if its from repco the kit will b from engines australia. They use acl rings. A lot of engine rebuilders use the engines australia kit and it is good, same with the acl rings as well. It will b fine as i have spoken to a few mates that rebuild them all the time that have said the same.

[Woop]

Where did you find out that they were a stretch bolt? Neither manual makes any mention about the bolts not being re-useable. I'm interested as i'm just about to remove the cyl head on mine to get it overhauled after 550,000kms How many KM's your engine and did any of the pre-combustion chambers or valve seats need replacing? Did they replace all the welsh plugs as well? Also how much for bolts from Nissan?

Thanks
Nick

[Daisy]

Where did you find out that they were a stretch bolt? Neither manual makes any mention about the bolts not being re-useable.

From memory when workin at a head cylinder workshop, my boss ALWAYS mentioned to the customers that the requirement for the head overhauled was new bolts to go with the kit for warranty reasons as old head bolts were pretty much no good.

Cant really remember that much :|

[Red Rover]

moor done about 80,000. Head looks perfect. No cracks between the chambers. It was still really clean, however with 500,000 u would probably need a rebuild on the head. It's just that this one looks really good. No crap around the combustion chambers either

No I didn't no about the strecth bolts either, but talking to a number of sources they all say the same thing, get new bolts and at $80 its not too bad considering there are 26 of them.

cheers

[Rainbow Warrior]

moor done about 80,000. Head looks perfect. No cracks between the chambers. It was still really clean, however with 500,000 u would probably need a rebuild on the head. It's just that this one looks really good. No crap around the combustion chambers either

No I didn't no about the strecth bolts either, but talking to a number of sources they all say the same thing, get new bolts and at $80 its not too bad considering there are 26 of them.

cheers

Pretty much the same as conrod bolts on many engines.

[Red Rover]

Hey clown, we've got it together. Just need to bolt up accessories so come arounf at beer o'clock & we'll be close to having it running