Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Strange GQ Outer axle bearing nut

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 61
Joined: Mon Dec 29, 2003 11:16 pm
Location: Tassie

Contact:
Contact captahab18

Strange GQ Outer axle bearing nut

Post by captahab18 »

Just doing some work on my new-to-me Nissan 88 GQ Patrol and noted some play in the wheels. Decided to whip the hubs off and instead of a great big stub axle nut I was surprised by the circular nut.

The lock washer was also round, with threaded smaller holes same as the nut. A tiny little bolt threads to through the washer and into the nut to lock it off. The larger diameter holes look to be designed for a tool (not much unlike the one we use to remove grinder discs).

First question what is this contraption? Also worth noting there wasn’t a single snap ring found on either sides!

What tha?!

http://picasaweb.google.com.au/lh/photo ... directlink

http://picasaweb.google.com.au/lh/photo ... directlink
"I can picture in my mind a world without war, a world without hate. And I can picture us attacking that world, because they'd never expect it." - Jack Handy
Top
Posts: 2347
Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth

Post by Z()LTAN »

thats an aftermarket jobbie, the GQ hub nuts have a tendency to loosen.

These ones couple with another lock ring that is keyed to the spindle then bolts to that hub nut.

See the GU ones
Locktup4x4.com.au - For all of your hardcore gear

Outlaws4x4.com
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

that is a nissan nut found on late model GQ and all GU. I change the older 2 nuts and tab washer out for these. There should still be a snap ring on the drive cone though.
Top
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

Yep looks like part of a GU hub nut with the locking plate and screw missing.

Cris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Top
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

Re: Strange GQ Outer axle bearing nut

Post by sudso »

captahab18 wrote:Just doing some work on my new-to-me Nissan 88 GQ Patrol and noted some play in the wheels. Decided to whip the hubs off and instead of a great big stub axle nut I was surprised by the circular nut.

The lock washer was also round, with threaded smaller holes same as the nut. A tiny little bolt threads to through the washer and into the nut to lock it off. The larger diameter holes look to be designed for a tool (not much unlike the one we use to remove grinder discs).

First question what is this contraption? Also worth noting there wasn’t a single snap ring found on either sides!

What tha?!

http://picasaweb.google.com.au/lh/photo ... directlink

http://picasaweb.google.com.au/lh/photo ... directlink
The snap ring goes on the outer groove for manual locking hubs
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 9 guests