Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Disco internl Cage DONE

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 691
Joined: Thu Dec 26, 2002 11:21 pm
Location: Lebanon

Contact:
Contact DiscoDino

Disco internl Cage DONE

Post by DiscoDino »

Well,

Been planning and talking (typing) about this for some time, so...after 6 months of research on PBB and here, I asked my brother (architect) to draw up something that I had in mind and send it off to a structural buddy of his...after some ping ponging we got the final drawing and it took me a couple of days to weld it up (using 60x3, 50x3 and 40x3 DOM tube).

I also mounted my summit racing seats on the cage and teh corbeau harnesses - it sure feels tight and secure now...

I also treated myself to a bling bling Momo steering wheel and placed the ARB compressor in the top middle section (as seen in the pics). The steareo and teh ECU will also be placed in that region to ellude water.

Here are the pics:
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Top
Posts: 1614
Joined: Fri Feb 21, 2003 8:44 pm
Location: Melbourne

Post by landy_man »

the bends look very tight or are they all nodes.... closeup pics please
Top
Posts: 691
Joined: Thu Dec 26, 2002 11:21 pm
Location: Lebanon

Contact:
Contact DiscoDino

Post by DiscoDino »

Landyman, there are only 3 bends per side. The neouds are at the central junctions and each corner was re-inforced with a gusset.
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Top
Posts: 1614
Joined: Fri Feb 21, 2003 8:44 pm
Location: Melbourne

Post by landy_man »

so instead of bending an a-pillar, b-pillar hoop you have straight tube with nodes... is this correct
Top
Posts: 691
Joined: Thu Dec 26, 2002 11:21 pm
Location: Lebanon

Contact:
Contact DiscoDino

Post by DiscoDino »

Yeah...

The 3 bends were made to the 60mm main hoop that goes from the A pillar all the way to the rear wheel wells... the bends were made at the dash kink, the A pillar peak and the B pillar
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Top
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

stout :cool:
Top
Posts: 691
Joined: Thu Dec 26, 2002 11:21 pm
Location: Lebanon

Contact:
Contact DiscoDino

Post by DiscoDino »

Yeah - it sure feels it. Hopefully will never need to find out.
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Top
Posts: 84
Joined: Sat Feb 28, 2004 9:02 am
Location: DUBAI

Contact:
Contact Phill

Post by Phill »

where are the pics?
Philip Yousef
Editor & PR
Dubai 4X4 CLUB
Top
Posts: 691
Joined: Thu Dec 26, 2002 11:21 pm
Location: Lebanon

Contact:
Contact DiscoDino

Post by DiscoDino »

Phill,

Dunno where they went... :roll:
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests