Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

rear diff

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 81
Joined: Sat Jan 29, 2005 12:39 pm

rear diff

Post by yella_rangie »

well i have broke 2 rear diffs in 1 week. same thing both times. centre pin snapped. have got the whole replacing it thing down to an art. can do it in less that 2 hours. but..i dont want to be doing this. i have done a huge search on toyota centres conversion..not that i know wat all those numbers and ratios mean. can someone tell me exactly wat i need in laymans terms? ie you need a diff from a 1980 hilux. blah blah..

or

is it worth me maybe just to buy a locker for the rear and upgrade my axles?

thanks ..im not trying to be a pain!!!!
Top
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Contact:
Contact HSV Rangie

Post by HSV Rangie »

Toy diffs.

rear low pinion.
pic a ratio that returns gearing to Std with the tyre diam you wish to run. (Have a excel spread sheet that I can email you)

Front: Hi pinion or jacmac centre. (need to be hi pinion to clear steering.)

If required I have a template/jig that can be used for drilling the Rover housing.

new studs M8 buy 30mm 8.8 studs.
8mm tap and drill tosuit.

Axles:

Rear: Jac mac inc flanges around $700.00
will require rear spindle to be bored out about 20 thou. aprox $40.00 for both.

Front: Jac mac axles around $550-600.00
will have to decide which CV you wish to run.
If you run toy cv you will need drive flanges.

Spindles again have to be bored if you go with 30 spline toy cv.
Swivell ball housing needs to be bored 20 thou aprox.

pinion flanges (toy diff) need to be machined and drilled to take rover drive shaft.

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

HSV Rangie wrote:Spindles again have to be bored if you go with 30 spline toy cv.
Swivell ball housing needs to be bored 20 thou aprox.

Michael.


what if i used Haultech Heat treated AEU2522 CVs ? ? ?
Top
Posts: 81
Joined: Sat Jan 29, 2005 12:39 pm

Post by yella_rangie »

no worries. thanks for that. though depending on prices it still maybe cheaper for me to go a detroit locker for the rear with upgraded axles and a tru trac for the front... i am looking at $1300 for a detroit locker from Opposite lock.
Top
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Contact:
Contact HSV Rangie

Post by HSV Rangie »

upgrade xisting wil be cheaper yes.

make sure you do the axles as they break next aftter fixing diff.

:lol:

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Top
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

Is that the cost of the Detroit! You can get an ARB, JacMac or Maxi locker for that much when you also factor the axles in.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 81
Joined: Sat Jan 29, 2005 12:39 pm

Post by yella_rangie »

oh...i didnt know that. so that woudl be the locker and the axles?
Top
Posts: 81
Joined: Sat Jan 29, 2005 12:39 pm

Post by yella_rangie »

oh...i didnt know that. so that woudl be the locker and the axles?
Top
Posts: 425
Joined: Sun Jan 16, 2005 10:42 pm
Location: Melbourne

Post by walker »

You would be looking at about $1300 for an ARB locker + approx $850 for the maxi-drive axel kit. I think a maxi-drive locker would be a bit more.

Whatever you do you have to do the axels so in that case an ARB locker would probably be cheapest.
Thanks,

Adam
Top
Posts: 876
Joined: Wed Apr 14, 2004 7:30 pm
Location: Terrigal, NSW

Post by fightara »

Or for cheapness sake you could just upgrade the rear to 24-spline discos and whack in an airlocker to get teh 4 hemispheres
Top
Posts: 379
Joined: Sat Aug 21, 2004 2:40 pm
Location: Epping , Vic

Post by BASSYK »

walker wrote:You would be looking at about $1300 for an ARB locker + approx $850 for the maxi-drive axel kit. I think a maxi-drive locker would be a bit more.

Whatever you do you have to do the axels so in that case an ARB locker would probably be cheapest.


plus about another $300 for the compressor etc..

just get the whole maxi drive and be done with it

just over $2k fitted

i got mine fitted aby dave at Hardcore 4x4 in mitcham and havent looked back since
Gu TD42t

[url]http://www.3rdrock4x4.com[/url]
Top
Posts: 81
Joined: Sat Jan 29, 2005 12:39 pm

Post by yella_rangie »

not too keen on arb...have heard lots of not so good things about them blowing seals and compressors overheating..thinking maybe maxidrive or a jacmac vaccum diff
Top
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Contact:
Contact HSV Rangie

Post by HSV Rangie »

Jac mac or maxi drive both are great

Michael.

JM does both air and vac.

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Top
Posts: 81
Joined: Sat Jan 29, 2005 12:39 pm

Post by yella_rangie »

emailed jacmac this is what he told me

"We only do air lockers cost AUD 1300, the 24 splined axles with flanges cost AUD 660, air compressor Thomas with looms AUD 400
Regards.
Jeff"
Top
Posts: 425
Joined: Sun Jan 16, 2005 10:42 pm
Location: Melbourne

Post by walker »

If you get a quote from Maxi-drive I would be interested to hear the comparison.
Thanks,

Adam
Top
Posts: 81
Joined: Sat Jan 29, 2005 12:39 pm

Post by yella_rangie »

yep. gonna ring maxi 2morrow
Top
Posts: 48
Joined: Mon Aug 30, 2004 11:44 am
Location: Melbourne

Contact:
Contact LukeV

Post by LukeV »

fightara wrote:Or for cheapness sake you could just upgrade the rear to 24-spline discos and whack in an airlocker to get teh 4 hemispheres


That's what I have done. Bits for the 24spline conversion cost $250, but that was for the whole axle housing disc to disc. Plus I sold (well swapped for Bundy :P ) my old 10 spline hubs and stubs. The ARB cost $1050 and the loom $30. Already had all the other bits.

Only have 31's at the moment until I get my body lift and a few other things sorted.

Luke
'88 Rangie, 3.9i, Bilstein Shocks and RS Springs, ARB Lockers F&R, 24spline rear axles, Flares, [url=http://users.on.net/~vethaak/Projects.htm]Custom centre console and cargo shelves[/url]
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests