Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

driving with the cdl in

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 1845
Joined: Sat Sep 06, 2003 8:55 pm
Location: mental house

driving with the cdl in

Post by patrolman »

i have taken the rear diff centre out of my range rover and i am wondering can i drive it with the centre diff lock in??

will it do any damage?
Top
User avatar
Jay
Posts: 251
Joined: Wed Sep 01, 2004 1:41 pm
Location: Lebanon

Contact:
Contact Jay

Post by Jay »

Did it on my disco but it was the front which was borken....you truck will be a two wheel that's it no biggy at all just be gentle on corners
96 Disco Gamel Trophy 36"*12.5 ET'II's, F&R ARB's,4.75 R&P GBR,GBR F&R
83 Rangie 2" OME Still Stock
Top
Posts: 141
Joined: Sun Jan 16, 2005 7:22 pm
Location: Gold Coast,Tweed

cdl

Post by THE 109 »

no damage worries there,they don't drive real nice at all without the rear but if the front drive shaft is off it drives fine.you will notice a little more backlash though.
Top
Posts: 655
Joined: Fri Nov 22, 2002 8:00 am
Location: Cranbourne, Victoria

Post by bundyrum4x4 »

Dont the rear wheel bearings run on the diff oil? If I am correct then with the centre removed there will be do oil in the housing.

Can some one clarify this.
89 Maverick LWB ute, Turbo Deisel, 6hp High Mount, 36" Peeds, lockers etc

GU 4.5, 35's etc
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Post by Maggot4x4 »

Drove from Melbourne to Sydney in front wheel drive last week after a UJ failed.
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Contact:
Contact HSV Rangie

Post by HSV Rangie »

drive with CD locked is ok.

have done many times after destroyinga diff remove parts remove d/shaft

drive home.

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Top
Posts: 27
Joined: Mon Jun 27, 2005 2:05 pm
Location: Melbourne

Post by igould »

Dont the rear wheel bearings run on the diff oil? If I am correct then with the centre removed there will be do oil in the housing.
As I understand it, if there is diff oil in your bearings, you've got problems. Bearings should be sealed from axle oil and run in their own grease.

Ian
77 Rangie Classic 4.4v8 manual, 2" spring lift, 2" body lift
97 Disco 3.9v8 manual
00 Disco Td5 auto
Top
Posts: 655
Joined: Fri Nov 22, 2002 8:00 am
Location: Cranbourne, Victoria

Post by bundyrum4x4 »

igould wrote:
Dont the rear wheel bearings run on the diff oil? If I am correct then with the centre removed there will be do oil in the housing.
As I understand it, if there is diff oil in your bearings, you've got problems. Bearings should be sealed from axle oil and run in their own grease.

Ian
That is the case in jap trucks and later model rovers but by memory the early rovers ran oil.

Some one will know the answer.
89 Maverick LWB ute, Turbo Deisel, 6hp High Mount, 36" Peeds, lockers etc

GU 4.5, 35's etc
Top
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Contact:
Contact HSV Rangie

Post by HSV Rangie »

eaqrly model RR had oil lube bearings later have grease.

cant remember change over date. 84 or the like???

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Top
Posts: 655
Joined: Fri Nov 22, 2002 8:00 am
Location: Cranbourne, Victoria

Post by bundyrum4x4 »

HSV Rangie wrote:eaqrly model RR had oil lube bearings later have grease.

cant remember change over date. 84 or the like???

Michael.
Thanks.

That means that if he drives it without a diff centre installed and no oil in the housing, he runs a great chance of wheel bearing failure.
89 Maverick LWB ute, Turbo Deisel, 6hp High Mount, 36" Peeds, lockers etc

GU 4.5, 35's etc
Top
Posts: 1845
Joined: Sat Sep 06, 2003 8:55 pm
Location: mental house

Post by patrolman »

thanks for the replys guys.

i didnt end up needed to drive the car so its all good :D
Top
Posts: 1403
Joined: Fri Jul 11, 2003 7:59 pm
Location: Melbourne

Post by DaveS3 »

Carry circlip pliers and 2 lts of gear oil. Pull the axles and flanges, then detach flanges and replace them with the caps.
Remove the tailshaft then all is good with minimal loss of oil.

Carry 2 or so litres of oil as well

:D
Land Rover Discovery - GQ conversion underway
Top
Posts: 141
Joined: Sun Jan 16, 2005 7:22 pm
Location: Gold Coast,Tweed

oil

Post by THE 109 »

1986 was the change from oil fed bearings to grease(could be wrong) but you can pull the seal from the hub/stub axle in the later ones to run them on oil.
Top
Posts: 410
Joined: Thu Aug 21, 2003 8:40 am
Location: Upper Hunter Valley NSW

Post by rick130 »

......but you can pull the seal from the hub/stub axle in the later ones to run them on oil.
yep, its a very common mod. Use an RTC3511 hub seal.
No more drive shaft/drive flange spline wear, and no more need to adjust the wheel bearings every 6-12 months.
300Tdi Defender 130 CC
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 21 guests