Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

IFS Hilux steering

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 217
Joined: Thu Jan 13, 2005 12:01 pm
Location: East BrisVegas

IFS Hilux steering

Post by V6XtraHilux »

Hey Guys,
Dunno if anybody can help but I'd appreciate it.

Problem I got is that Ive got the torsion bars wound up a fair way, at least 50-70mm over standard, but at full lock I get a metal popping sound.

I suspect its the steering joint shown in the picture, the joint is at a really big angle with the rubber boot not really fitting in the gap between the tie rod and the link.

Anybody have any idea how to fix this, and is this the problem?

Im running 33x11.5, but seems to happen also when im running my roadies, 31x10.5.

Thanks.

Ps. Pic is not from my car, just a similar one.
You do not have the required permissions to view the files attached to this post.
03 V6 Xtra Cab Hilux F&R Lockers 4' BL/susp 33' BFG MTs sliders ARB bullbar IPFs-workn 4 SAS$$
Top
Posts: 141
Joined: Fri Feb 04, 2005 12:40 pm

Post by beefa125 »

Wind em down ?
Top
Posts: 199
Joined: Wed Jun 29, 2005 12:55 pm
Location: Gold Coast

Post by Rascal »

Try greasing the steering stops
Top
Posts: 1231
Joined: Sun May 15, 2005 1:00 pm
Location: Bayside, Brisbane

Post by Mr DJ »

Do you have BJ spacers as well like the one in the pic ???

Worn CV's ???????
91' Hilux Surf with the usual mods & a few different ones ....
Coil SAS by www.budscustoms.com.au
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest