Outer Limits 4x4 Board

sorry for the high jack but thinking of running 2 pumps one for the front and a seperate curcuit for the rear dose anyone do this just thought i could then steer both ends at the same time

There is a comp soon up at MOA which is 600kms north sounds like your kind of event its mainly for winch challenge vehicles going fast.I run an invite only rock crawling event once a year and a couple of others are trying to get a few more events up and running this year.

Duncan

I thought it was more a case of old rules from when the cars had to be road licenced

Dont quite understand some of the rules think that they were good for years ago but could be deleted. Why do we have to have a working horn ,brake lights and reverseing lights when there is only 1 car on the courese at a time.Just about every team has now inter coms and the people scoreing stay well ...

Thats one big field to get around the courses in time.

Are the time limits the same as last year or shorter again to deal with the larger field.

Nice to know both WA teams made it now just the long trip over.

Can anyone give me drive shaft lenghts as Im looking for something that has long eard yokes for better angle on artic but is one diamter so easy to cut and shorten needs to be just over 1meter long early rears are good for lenght but taper down were the yokes are welded in so no good for shortening ...

Third year for us towing the car all the way from WA cant believe there still hasnt been a team from South Oz in yet. Quick question is the scoreing system for engineering going to change this year ,you could get every vehicle to list all mods to cars it has to almost impossible to get enough info ...

Team Evolution from WA hopes to be back for a third year our nomination is in just hope we get a bearth .

New car for next year think it will be the first 4 wheel steer vitara in Oz might even retire the 2 inch roller for a nice paint job but still Macas colors

Duncan

Ok building a new car for next years Tuff Truck and running a PSC pump they say to only run Power steering fluid but I have always thought and been told that ATF is the same .

Can anyone shed some light on this for me or whats everyone else running that has a PSC pump?

Duncan

With you Rhett autos are for lazy bastards who cant think for them selves lol lol

Thanks guys it was for the fly wheel to crank.

As it says can anyone let me know the torque settings for the fly wheel bolts on a 97 vitara with the 16b motor thanks

Thanks

Im building a comp truck for next years Tuff Truck it will be based on a 97 swb vitara with a 16b motor standard 5spd but a divorced sierra case running 6.4s the diffs will be after market 60 series houseings running 5.29s all to turn 40 inch comp spec treps. So I need a new clutch the fly wheel ...

Im building a comp truck for next years Tuff Truck it will be based on a 97 swb vitara with a 16b motor standard 5spd but a divorced sierra case running 6.4s the diffs will be after market 60 series houseings running 5.29s all to turn 40 inch comp spec treps. So I need a new clutch the fly wheel ...

Had this problem it will be the inner axles that are to long by about 3mm cut of the small taper of the end of the inner axles then grind a new one all fixed Bobbys measurements arnt that good sometimes

Ok have talked to Brian at Suzi Shop here in WA he was telling me that when bying a baleno motor check to make sure the block isnt cracked.So Im thinking the blocks arnt that strong what i need to find out is do I keep the original engine mounts which will flex when reved hard or go my treid and ...

Ill have one please jbdb@westnet.com.au

So how much all up if you dont want to post up could you please pm me as I need to by rims for the new build

I have done this conversion and sold the vehicle it still runs and is a freak of road going everywhere far bigger dollar rigs go with no fuss but it is a comp car definatly not road going. it runs a VN series one but similar to your VS also turbo 700 and twin hilux cases with reduction gears.The ...

Thanks guys weighing up options for next build

Ok how much wider is a 60 series diff compared to a hilux diff

Going 4 wheel steer wondering who is running what lockers. Thought of air lockers but I personaly dont like the air side of things think the lkocker itself is great but the rest could be better. Detroits I have been told now by a few people that they fail under the shock loading of brakeing an axle ...

Thanks for trying thought more than just one person would have their number.I know the guy with the lada and Geoff Team Mog both bought diffs from him before last Tuff Truck so they should have a contact number.

Thanks as have finnaly found an email address but no phone number much better to talk to people Im old school

Looked everywhere dose anyone have their phone number need to see about a pair of steering 404s

Had a 60 series years ago that did this was the valves on top of the injector pump that maintain presure between the pump and the injectors they were leakinging back.So in the morning there wasnt enough presure on start up in the injector lines to crack the injectors thus running rough untill the ...

Center pop all around the bearing journal area were the bearing will sit to make it a tighter fit also use loctite

Thanks very much

Thanks will look into it